PartsTable TECHNICAL DATA SHEET
NSN 5990-00-879-9187Government record, cited

Synchro, Control Transformer5990-00-879-9187

NSN 5990-00-879-9187 · NIIN 008799187
FSC 5990 — Synchros and Resolvers · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5990-00-879-9187 · 5990008799187 · NIIN 008799187 · 00-879-9187 · FSC 5990 Synchros and Resolvers · 413264-1 · CTH-10-WS-1
Nearby stock numbers  ·
Features
  • Synchro,control Transformer — FSC 5990
  • Body Size: 10
  • Shaft Type: ROUND, SLOTTED SINGLE SHAFT
  • Flange Diameter: 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN
  • Mounting Thread Tolerance Class: 2B INTERNAL
  • Undercut Width: 0.06200 INCHES NOMINAL IN
  • Shaft Diameter: 0.0900 INCHES NOMINAL SINGLE SHAFT IN
  • Rotor DC Resistance in Ohms: 140.00 NOMINAL
Identification
  • NSN: 5990-00-879-9187
  • NIIN: 008799187
  • FSC: 5990 — Synchros and Resolvers
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Synchro,control Transformer, cataloged under National Stock Number 5990-00-879-9187, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5990-00-879-9187
Item NameSynchro,control Transformer
FSC / FSG5990 / 59 — Synchros and Resolvers
StatusACTIVE
Body Size10
Shaft TypeROUND, SLOTTED SINGLE SHAFT
Flange Diameter0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN
Mounting Thread Tolerance Class2B INTERNAL
Undercut Width0.06200 INCHES NOMINAL IN
Shaft Diameter0.0900 INCHES NOMINAL SINGLE SHAFT IN
Rotor DC Resistance in Ohms140.00 NOMINAL
Undercut Diameter0.8370 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM IN
Length0.0620 INCHES NOMINAL SHOULDER IN
Fragility FactorMODERATELY RUGGED
Body StyleSTANDARD ROUND C
Flange Thickness0.06300 INCHES NOMINAL IN
Shaft Maximum Runout0.0010 INCHES IN
Stator Input Current Rating80.0 MILLIAMPERES NOMINAL
Alignment Hole Bolt Circle Diameter0.6750 INCHES MINIMUM AND 0.6810 INCHES MAXIMUM IN
Mounting Facility Screw Thread Series DesignatorUNF
Mounting Surface to Terminal End Distance1.2410 INCHES MAXIMUM IN
Frequency in Hertz400.0 NOMINAL
Zro Resistance in Ohms195.00 NOMINAL
Stator Input Electrical Power Rating190.0 MILLIWATTS NOMINAL
Plus J Zso Reactance in Ohms124.00 NOMINAL
Terminal LocationREAR
Shaft Maximum Radial Play0.0005 INCHES IN
Schematic Diagram Designator1 Y-ROTOR, 1 STATOR
Alignment Hole Quantity3
Shaft Length0.4370 INCHES NOMINAL SINGLE SHAFT IN
Pilot Diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
Shoulder Diameter0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM IN
Stator Input Voltage Rating in Volts26.0 NOMINAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
1720-00-949-5893413264-1 POSSIBLE MATCH
COUPLING,MOTOR DRUM
Possible match (shared part number)Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
413264-1 3/2 Design control — primary reference
U.S. Government activity
CTH-10-WS-1 5/2 Secondary reference
U.S. Government activity
Related Parts
1720-00-949-5893POSSIBLE MATCH
COUPLING,MOTOR DRUM
413264-1

Frequently Asked Questions

What is NSN 5990-00-879-9187?

NSN 5990-00-879-9187 is a Synchro,control Transformer, classified under FSC 5990, Synchros and Resolvers. Status: active.

What NSN replaces 5990-00-879-9187?

1 possible match (shared part number, not a government interchangeability claim): 1720-00-949-5893. Verify interchangeability with system specifications before substitution.

What are the specifications of 5990-00-879-9187?

Key specifications for 5990-00-879-9187: Body Size: 10; Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Flange Diameter: 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN; Mounting Thread Tolerance Class: 2B INTERNAL. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5990-00-879-9187 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com