The Synchro,control Transformer, cataloged under National Stock Number 5990-00-844-5659, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Moog Inc.. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-844-5659 |
| Primary Part Number | CTH-10-MS-4 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | Moog Inc. |
| Status | ACTIVE |
| Body Size | 10 |
| Shaft Type | ROUND SINGLE SHAFT |
| Flange Diameter | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Shaft Diameter | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT IN |
| Rotor DC Resistance in Ohms | 466.00 NOMINAL |
| Undercut Diameter | 0.8370 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM IN |
| Length | 0.0620 INCHES NOMINAL SHOULDER IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | STANDARD ROUND C |
| Flange Thickness | 0.0630 INCHES NOMINAL IN |
| Stator Input Current Rating | 17.0 MILLIAMPERES NOMINAL |
| Alignment Hole Bolt Circle Diameter | 0.6780 INCHES NOMINAL IN |
| Phase Shift Angle in Deg | 12.000 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 1.2480 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Zro Resistance in Ohms | 685.00 NOMINAL |
| Stator Input Electrical Power Rating | 54.0 MILLIWATTS NOMINAL |
| Plus J Zso Reactance in Ohms | 560.00 NOMINAL |
| Zrs Resistance in Ohms | 1000.00 NOMINAL |
| Terminal Location | REAR |
| Alignment Hole Quantity | 2 |
| Shaft Length | 0.4750 INCHES NOMINAL SINGLE SHAFT IN |
| Pilot Diameter | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Shoulder Diameter | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM IN |
| Stator Input Voltage Rating in Volts | 10.2 NOMINAL |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 50.00 |
| Plus J Zro Reactance in Ohms | 2700.00 NOMINAL |
| Pilot Length | 0.0380 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL D — Destroy Item |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CTH-10-MS-4 | Moog Inc. (USA) |
| Reference | Meaning |
|---|---|
| 1783131-001 | 5/9 Secondary reference Lockheed Martin Corporation Div Rms - Mitchel Field |
| AY503-44A3 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| AY503-44A3 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems |
| 4077-08 | 3/2 Design control — primary reference U.S. Government activity |
| CTH10MS4 | 5/2 Secondary reference U.S. Government activity |
NSN 5990-00-844-5659 is a Synchro,control Transformer, manufactured by Moog Inc., classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-00-844-5659 has 1 manufacturer part number on file: CTH-10-MS-4 (Moog Inc.).
2 possible matches (shared part number, not a government interchangeability claim): 5990-00-965-6680, 2915-01-053-4430. Verify interchangeability with system specifications before substitution.
Key specifications for CTH-10-MS-4: Body Size: 10; Shaft Type: ROUND SINGLE SHAFT; Flange Diameter: 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM IN; Undercut Width: 0.0620 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-00-844-5659 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.