The Synchro,control Transformer, cataloged under National Stock Number 5990-00-824-3207, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-824-3207 |
| Primary Part Number | 10511617 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Body Size | 11 |
| Shaft Type | ROUND SINGLE SHAFT |
| Flange Diameter | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN |
| Undercut Width | 0.0500 INCHES NOMINAL IN |
| Shaft Diameter | 0.1870 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT IN |
| Undercut Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN |
| Length | 0.0620 INCHES NOMINAL SHOULDER IN |
| Body Style | STANDARD ROUND C |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Stator Input Current Rating | 37.0 MILLIAMPERES MAXIMUM |
| Alignment Hole Bolt Circle Diameter | 0.8120 INCHES NOMINAL IN |
| Phase Shift Angle in Deg | 6.200 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 1.7940 INCHES NOMINAL IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 900.0 MILLIWATTS MAXIMUM |
| Terminal Location | REAR |
| Alignment Hole Quantity | 4 |
| Shaft Length | 0.5550 INCHES NOMINAL SINGLE SHAFT IN |
| Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Maximum Fundamental Null Voltage in Millivolts Per Volt | 75.00 OUTPUT |
| Shoulder Diameter | 0.9750 INCHES NOMINAL IN |
| Stator Input Voltage Rating in Volts | 90.0 NOMINAL |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 45.00 |
| Alignment Hole Depth | 0.1250 INCHES NOMINAL IN |
| Transformation Ratio | 0.783 ROTOR TO STATOR NOMINAL |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Electrical Error Angular Range in Minutes | -7.0 TO 7.0 |
| Actuator Friction Torque at Plus 25 Deg Celsius | 0.05 INCH-OUNCES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING BODY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 10511617 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| Reference | Meaning |
|---|---|
| M0-1127-2 | 5/9 Secondary reference U.S. Government activity |
NSN 5990-00-824-3207 is a Synchro,control Transformer, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-00-824-3207 has 1 manufacturer part number on file: 10511617 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
Key specifications for 10511617: Body Size: 11; Shaft Type: ROUND SINGLE SHAFT; Flange Diameter: 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN; Undercut Width: 0.0500 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.