The Synchro,differential Transmitter, cataloged under National Stock Number 5990-00-811-5227, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 8 commercial cross-references from 6 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5990-00-811-5227 |
| Primary Part Number | 8212772 |
| Item Name | Synchro,differential Transmitter |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | CANCELLED |
| Second Shoulder Diameter | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM IN |
| Shoulder Diameter | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN |
| Pilot Diameter | 0.5999 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM IN |
| Flange Diameter | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN |
| Second Shoulder Length | 0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM IN |
| Body Diameter | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN |
| Flange Thickness | 2.2480 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN |
| Body Style | STANDARD ROUND D |
| Plus J Zrs Reactance in Ohms | 29.70 NOMINAL |
| Specification/standard Data | 81349-MIL-S-20708/94 GOVERNMENT SPECIFICATION |
| Pilot Length | 0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM IN |
| Length | 0.2500 INCHES NOMINAL SHOULDER IN |
| Terminal Location | REAR |
| Electrical Error Angular Range in Minutes | -8.0 TO 8.0 |
| Shaft Thread Length | 0.2660 INCHES NOMINAL SINGLE SHAFT IN |
| Aft of First Flange Diameter | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM IN |
| Actuator Friction Torque at Minus 55 Deg Celsius | 0.50 INCH-OUNCES MAXIMUM IN |
| Test Data Document | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Shaft Nominal Thread Size | 0.250 INCHES SINGLE SHAFT IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 2.8 WATTS NOMINAL |
| Stator Input Current Rating | 270.0 MILLIAMPERES NOMINAL |
| Plus J Zro Reactance in Ohms | 314.00 NOMINAL |
| Terminal Type and Quantity | 7 SCREW |
| Shaft Length | 0.6930 INCHES NOMINAL SINGLE SHAFT IN |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 100.00 |
| Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
| Shaft Thread Series Designator | UNF SINGLE SHAFT |
| Spline Tooth Quantity | 22 SINGLE SHAFT |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 8212772 PRIMARY | Sae International Dba Sae International (USA) |
| SAE-AS20708/94 | Sae International Dba Sae International (USA) |
| MS51083-1 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-S-20708/94 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 113H2B | Northrop Grumman Systems Corporation (USA) |
| 23CDX4A | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 9072985 | Us Army Aviation and Missile Command (USA) |
| 113H2B | Kontron Europe Gmbh (DEU) |
NSN 5990-00-811-5227 is a Synchro,differential Transmitter, manufactured by Sae International Dba Sae International, classified under FSC 5990 (No Item Name Available). Status: cancelled.
NSN 5990-00-811-5227 has 8 cross-referenced part numbers: 8212772 (Sae International Dba Sae International), SAE-AS20708/94 (Sae International Dba Sae International), MS51083-1 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MIL-S-20708/94 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 113H2B (Northrop Grumman Systems Corporation) and 3 more.
There are 12 known substitutes for 5990-00-811-5227: 5990-00-553-6711, 5990-00-636-4111, 5990-00-636-4119 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for 8212772: Second Shoulder Diameter: 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM IN; Shoulder Diameter: 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN; Pilot Diameter: 0.5999 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM IN; Flange Diameter: 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5990-00-811-5227 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.