The Synchro,control Transformer, cataloged under National Stock Number 5990-00-734-7285, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-734-7285 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Status | ACTIVE |
| Body Size | 8 |
| Shaft Type | ROUND, TAPERED SINGLE SHAFT |
| Shaft Radial Play Test Point | 0.125 INCHES NOMINAL IN |
| Flange Diameter | 0.7500 INCHES NOMINAL IN |
| Undercut Width | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN |
| Shaft Diameter | 0.1247 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM SINGLE SHAFT IN |
| Undercut Diameter | 0.6910 INCHES MAXIMUM IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | STANDARD ROUND A |
| Shaft Radial Play Determining Weight | 4.0 OUNCES OZ |
| Flange Thickness | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN |
| Shaft Maximum Runout | 0.0003 INCHES IN |
| Mounting Surface to Terminal End Distance | 1.2410 INCHES MAXIMUM IN |
| Terminal Location | REAR |
| Shaft End Play Determining Weight | 8.0 OUNCES OZ |
| Shaft Maximum Radial Play | 0.0008 INCHES IN |
| Schematic Diagram Designator | 1 Y-ROTOR, 1 STATOR |
| Specification/standard Data | 89954-926C321-1 MANUFACTURERS SOURCE CONTROL |
| Pilot Diameter | 0.5000 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM IN |
| Pilot Length | 0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING BODY |
| Terminal Type and Quantity | 3 WIRE LEAD |
| Shaft End Play | 0.0015 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 926C321P2 | 1/2 Source control — Government-approved source U.S. Government activity |
| T08-RTF-09/L459 | 5/9 Secondary reference U.S. Government activity |
| CM41003017 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5990-00-734-7285 is a Synchro,control Transformer, classified under FSC 5990, Synchros and Resolvers. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5990-00-911-0574. Verify interchangeability with system specifications before substitution.
Key specifications for 5990-00-734-7285: Body Size: 8; Shaft Type: ROUND, TAPERED SINGLE SHAFT; Shaft Radial Play Test Point: 0.125 INCHES NOMINAL IN; Flange Diameter: 0.7500 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-00-734-7285 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.