The Synchro,control Transformer, cataloged under National Stock Number 5990-00-732-9261, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-732-9261 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Status | ACTIVE |
| Body Size | 15 |
| Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
| Flange Diameter | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN |
| Undercut Width | 0.0780 INCHES NOMINAL IN |
| Shaft Diameter | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN |
| Undercut Diameter | 1.3120 INCHES NOMINAL IN |
| Length | 0.1320 INCHES NOMINAL SHOULDER IN |
| Body Style | STANDARD ROUND C |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Stator Input Current Rating | 7.0 MILLIAMPERES NOMINAL |
| Mounting Surface to Terminal End Distance | 1.5600 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 14.0 MILLIWATTS NOMINAL |
| Terminal Location | REAR |
| Shaft Length | 0.5400 INCHES NOMINAL SINGLE SHAFT IN |
| Pilot Diameter | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Shoulder Diameter | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN |
| Stator Input Voltage Rating in Volts | 26.0 NOMINAL |
| Shaft Slot Width | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT IN |
| Transformation Ratio | 2.215 ROTOR TO STATOR NOMINAL |
| Pilot Length | 0.0400 INCHES NOMINAL IN |
| Actuator Friction Torque at Plus 25 Deg Celsius | 4.0 CENTIMETER-GRAMS NOMINAL CM |
| Actuator Friction Torque at Minus 55 Deg Celsius | 16.0 CENTIMETER-GRAMS NOMINAL CM |
| Material | STEEL CORROSION RESISTING BODY |
| Terminal Type and Quantity | 5 WIRE LEAD |
| Shaft Slot Depth | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL D — Destroy Item |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CTH15D5A626 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5990-00-732-9261 is a Synchro,control Transformer, classified under FSC 5990, Synchros and Resolvers. Status: active.
Key specifications for 5990-00-732-9261: Body Size: 15; Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Flange Diameter: 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM IN; Undercut Width: 0.0780 INCHES NOMINAL IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-00-732-9261 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.