The Synchro,differential Transmitter, cataloged under National Stock Number 5990-00-556-9851, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-556-9851 |
| Primary Part Number | MIL-S-2335 |
| Item Name | Synchro,differential Transmitter |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Body Style | STANDARD ROUND DOUBLE FLANGE B |
| Shoulder Diameter | 3.3590 INCHES NOMINAL IN |
| Flange Diameter | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM IN |
| Pilot Diameter | 1.3200 INCHES NOMINAL IN |
| Flange Thickness | 0.2500 INCHES NOMINAL IN |
| Length | 1.0300 INCHES NOMINAL SHOULDER IN |
| Terminal Location | REAR |
| Body Size | 37 |
| Shaft Slot Depth | 0.0460 INCHES NOMINAL SINGLE SHAFT IN |
| Shaft Type | ROUND, THREADED SINGLE SHAFT |
| Stator Input Electrical Power Rating | 15.0 WATTS MAXIMUM |
| Shaft Thread Length | 0.1800 INCHES NOMINAL SINGLE SHAFT IN |
| Shaft Length | 0.9900 INCHES NOMINAL SINGLE SHAFT IN |
| Torque Gradient Per Angular Deg | 0.300 INCH-OUNCES MINIMUM IN |
| Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
| Terminal Type and Quantity | 6 WIRE LEAD |
| Stator Input Voltage Rating in Volts | 90.0 NOMINAL |
| Test Data Document | 81349-MIL-S-22335 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Frequency in Hertz | 60.0 NOMINAL |
| Maximum Temp Rise | 50.0 CELSIUS DEGC |
| Electrical Error Angular Range in Minutes | -18.0 TO 18.0 |
| Shaft Thread Class | 3A SINGLE SHAFT A |
| Shaft Diameter | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE SHAFT IN |
| Distance Between Flanges | 1.8120 INCHES NOMINAL IN |
| Pilot Length | 0.1600 INCHES NOMINAL IN |
| Shaft Thread Series Designator | UNF SINGLE SHAFT |
| Stator Input Current Rating | 1.0 AMPERES MAXIMUM |
| Shaft Slot Width | 0.0310 INCHES NOMINAL SINGLE SHAFT IN |
| Shaft Nominal Thread Size | 0.250 INCHES SINGLE SHAFT IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-S-2335 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| SK91592 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| 213100PC2 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| 5SDG | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 213100PC1 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
NSN 5990-00-556-9851 is a Synchro,differential Transmitter, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5990 (No Item Name Available). Status: active.
NSN 5990-00-556-9851 has 5 cross-referenced part numbers: MIL-S-2335 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), SK91592 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier), 213100PC2 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier), 5SDG (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 213100PC1 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).
There are 12 known substitutes for 5990-00-556-9851: 5990-00-268-9068, 5990-00-268-9074, 5990-00-268-9075 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-S-2335: Overall Length: 6.3600 INCHES NOMINAL IN; Body Style: STANDARD ROUND DOUBLE FLANGE B; Shoulder Diameter: 3.3590 INCHES NOMINAL IN; Flange Diameter: 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.