The Synchro,transmitter, cataloged under National Stock Number 5990-00-491-8613, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-491-8613 |
| Primary Part Number | 3028238 |
| Item Name | Synchro,transmitter |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| Status | ACTIVE |
| Pilot Diameter | 0.8750 INCHES MAXIMUM IN |
| Body Style | STANDARD ROUND B |
| Flange Diameter | 1.4370 INCHES MAXIMUM IN |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Shoulder Diameter | 1.3120 INCHES MAXIMUM IN |
| Undercut Width | 0.0780 INCHES NOMINAL IN |
| Shaft Thread Direction | RIGHT-HAND SINGLE SHAFT |
| Pilot Length | 0.0400 INCHES NOMINAL IN |
| Shaft Maximum Radial Play | 0.0006 INCHES IN |
| Schematic Diagram Designator | 1 Y-ROTOR, 1 STATOR |
| Shaft Nominal Thread Size | 0.190 INCHES SINGLE SHAFT IN |
| Shaft Diameter | 0.1872 INCHES MAXIMUM SINGLE SHAFT IN |
| Zro Impedance Magnitude in Ohms | 5335.00 MINIMUM AND 6265.00 MAXIMUM |
| Rotor Input Voltage Rating in Volts | 115.0 NOMINAL |
| Shaft Thread Class | 2A SINGLE SHAFT A |
| Shaft Thread Series Designator | UNF SINGLE SHAFT |
| Shaft End Play Determining Weight | 16.0 OUNCES OZ |
| Alignment Hole Quantity | 4 |
| Alignment Hole Bolt Circle Diameter | 1.1000 INCHES NOMINAL IN |
| Maximum Temp Rise | 20.0 CELSIUS DEGC |
| Terminal Type and Quantity | 5 SCREW |
| Transformation Ratio | 0.783 STATOR TO ROTOR NOMINAL |
| Maximum Fundamental Null Voltage in Millivolts Per Volt | 45.00 OUTPUT |
| Length | 0.1320 INCHES NOMINAL SHOULDER IN |
| Zss Impedance Angle in Deg | 11.00 MINIMUM AND 16.00 MAXIMUM |
| Shaft End Play | 0.0010 INCHES NOMINAL IN |
| Zss Impedance Magnitude in Ohms | 675.00 MINIMUM AND 825.00 MAXIMUM |
| Spline Tooth Quantity | 21 SINGLE SHAFT |
| Rotor Input Electrical Power Rating | 360.0 MILLIWATTS NOMINAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| VCX15-6D2-107 | General Dynamics Motion Control Llc (USA) |
| 15CX491-8613 | Motion Devices Technology, Inc. (USA) |
| MIL-S-20708/20-001,T | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 3028238 | Bae Systems Land & Armaments L.p. (USA) |
| 3028238 PRIMARY | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
| 15CX6C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5990-00-491-8613 is a Synchro,transmitter, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5990 (No Item Name Available). Status: active.
NSN 5990-00-491-8613 has 6 cross-referenced part numbers: VCX15-6D2-107 (General Dynamics Motion Control Llc), 15CX491-8613 (Motion Devices Technology, Inc.), MIL-S-20708/20-001,T (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 3028238 (Bae Systems Land & Armaments L.p.), 3028238 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier) and 1 more.
There are 2 known substitutes for 5990-00-491-8613: 5990-00-018-9723, 2815-01-509-5049. Verify interchangeability with system specifications before substitution.
Key specifications for 3028238: Overall Length: 3.0110 INCHES MAXIMUM IN; Pilot Diameter: 0.8750 INCHES MAXIMUM IN; Body Style: STANDARD ROUND B; Flange Diameter: 1.4370 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.