The Synchro,control Transformer, cataloged under National Stock Number 5990-00-444-6987, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-444-6987 |
| Primary Part Number | M20708/1-02E |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Body Size | 11 |
| Shaft Type | ROUND, SLOTTED SINGLE SHAFT |
| Zrs Impedance Angle in Deg | 22.00 MINIMUM AND 32.00 MAXIMUM |
| Flange Diameter | 1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Shaft Diameter | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT IN |
| Undercut Diameter | 0.9750 INCHES NOMINAL IN |
| Length | 0.0620 INCHES NOMINAL SHOULDER IN |
| Body Style | STANDARD ROUND C |
| Zrs Impedance Magnitude in Ohms | 585.00 MINIMUM AND 700.00 MAXIMUM |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Stator Input Current Rating | 18.0 MILLIAMPERES NOMINAL |
| Alignment Hole Bolt Circle Diameter | 0.8120 INCHES NOMINAL IN |
| Phase Shift Angle in Deg | 5.000 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 1.8010 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 20.0 WATTS NOMINAL |
| Terminal Location | REAR |
| Alignment Hole Quantity | 4 |
| Zso Impedance Angle in Deg | 77.30 MINIMUM AND 83.50 MAXIMUM |
| Shaft Length | 0.3680 INCHES NOMINAL SINGLE SHAFT IN |
| Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Zso Impedance Magnitude in Ohms | 4350.00 MINIMUM AND 5700.00 MAXIMUM |
| Maximum Fundamental Null Voltage in Millivolts Per Volt | 32.00 OUTPUT |
| Shoulder Diameter | 0.0995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN |
| Stator Input Voltage Rating in Volts | 90.0 NOMINAL |
| Maximum Total Null Voltage Output in Millivolts Per Volt | 60.00 |
| Alignment Hole Depth | 0.1120 INCHES NOMINAL IN |
| Shaft Slot Width | 0.0200 INCHES NOMINAL SINGLE SHAFT IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| M20708/1-02E PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| AS20708/1 | 5/9 Secondary reference U.S. Government activity |
| M20708/1D-002 | 5/9 Secondary reference U.S. Government activity |
| M20708/1-02E | 5/9 Secondary reference U.S. Government activity |
| 11CT4E | 5/1 Secondary reference U.S. Government activity |
| M20708-1-002 | 5/9 Secondary reference U.S. Government activity |
| MILC20708-1 | 5/9 Secondary reference U.S. Government activity |
| SAE-AS20708/1 | 3/1 Design control — primary reference Sae International Dba Sae International |
| M20708/1-02E | 5/9 Secondary reference U.S. Government activity |
| M20708-1-002 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| AS20708/1 | 5/9 Secondary reference Sae International Dba Sae International |
NSN 5990-00-444-6987 is a Synchro,control Transformer, manufactured by Sae International Dba Sae International, classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-00-444-6987 has 1 manufacturer part number on file: M20708/1-02E (Sae International Dba Sae International).
2 possible matches (shared part number, not a government interchangeability claim): 5990-00-917-4215, 5990-00-948-9229. Verify interchangeability with system specifications before substitution.
Key specifications for M20708/1-02E: Body Size: 11; Shaft Type: ROUND, SLOTTED SINGLE SHAFT; Zrs Impedance Angle in Deg: 22.00 MINIMUM AND 32.00 MAXIMUM; Flange Diameter: 1.0615 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5990-00-444-6987 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.