PartsTable TECHNICAL DATA SHEET
NSN 5990-00-160-1072Government record, cited

Synchro, Control Transformer5990-00-160-1072

NSN 5990-00-160-1072 · NIIN 001601072
FSC 5990 — Synchros and Resolvers · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5990-00-160-1072 · 5990001601072 · NIIN 001601072 · 00-160-1072 · FSC 5990 Synchros and Resolvers · CTH8STIL584 · CTH8ST1L584 · HTC-8-ST-1
Nearby stock numbers  ·
Features
  • Synchro,control Transformer — FSC 5990
  • Body Size: 8
  • Shaft Type: ROUND SINGLE SHAFT
  • Flange Diameter: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
  • Undercut Width: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
  • Shaft Diameter: 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT IN
  • Rotor DC Resistance in Ohms: 143.00 NOMINAL
  • Undercut Diameter: 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM IN
Identification
  • NSN: 5990-00-160-1072
  • NIIN: 001601072
  • FSC: 5990 — Synchros and Resolvers
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Synchro,control Transformer, cataloged under National Stock Number 5990-00-160-1072, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5990-00-160-1072
Item NameSynchro,control Transformer
FSC / FSG5990 / 59 — Synchros and Resolvers
StatusACTIVE
Body Size8
Shaft TypeROUND SINGLE SHAFT
Flange Diameter0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
Undercut Width0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
Shaft Diameter0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT IN
Rotor DC Resistance in Ohms143.00 NOMINAL
Undercut Diameter0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Body StyleSTANDARD ROUND A
Flange Thickness0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
Stator Input Current Rating87.0 MILLIAMPERES NOMINAL
Phase Shift Angle in Deg9.000 INPUT TO OUTPUT NOMINAL
Mounting Surface to Terminal End Distance1.2410 INCHES MAXIMUM IN
Frequency in Hertz400.0 NOMINAL
Zro Resistance in Ohms210.00 NOMINAL
Stator Input Electrical Power Rating210.0 MILLIWATTS NOMINAL
Plus J Zso Reactance in Ohms114.00 NOMINAL
Zrs Resistance in Ohms250.00 NOMINAL
Terminal LocationREAR
Shaft Length0.4570 INCHES NOMINAL SINGLE SHAFT IN
Pilot Diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
Stator Input Voltage Rating in Volts11.8 NOMINAL
Maximum Total Null Voltage Output in Millivolts Per Volt30.00
Plus J Zro Reactance in Ohms690.00 NOMINAL
Transformation Ratio2.303 ROTOR TO STATOR NOMINAL
Pilot Length0.0380 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM IN
Zso Resistance in Ohms28.00 NOMINAL
Actuator Friction Torque at Plus 25 Deg Celsius4.0 CENTIMETER-GRAMS MAXIMUM CM
Actuator Friction Torque at Minus 55 Deg Celsius16.0 CENTIMETER-GRAMS MAXIMUM CM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5990-00-891-4085CM41004065 POSSIBLE MATCH
SYNCHRO,CONTROL TRANSFORMER
Possible match (shared part number)Kearfott Corporation Div Guidance and Navigation Division
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
CTH8STIL584 5/9 Secondary reference
U.S. Government activity
CTH8ST1L584 5/9 Secondary reference
U.S. Government activity
HTC-8-ST-1 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5990-00-891-4085POSSIBLE MATCH
SYNCHRO,CONTROL TRANSFORMER
CM41004065

Frequently Asked Questions

What is NSN 5990-00-160-1072?

NSN 5990-00-160-1072 is a Synchro,control Transformer, classified under FSC 5990, Synchros and Resolvers. Status: active.

What NSN replaces 5990-00-160-1072?

1 possible match (shared part number, not a government interchangeability claim): 5990-00-891-4085. Verify interchangeability with system specifications before substitution.

What are the specifications of 5990-00-160-1072?

Key specifications for 5990-00-160-1072: Body Size: 8; Shaft Type: ROUND SINGLE SHAFT; Flange Diameter: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN; Undercut Width: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5990-00-160-1072 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com