The Synchro,control Transformer, cataloged under National Stock Number 5990-00-078-3182, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5990-00-078-3182 |
| Primary Part Number | 7627969P001 |
| Item Name | Synchro,control Transformer |
| FSC / FSG | 5990 / 59 — Synchros and Resolvers |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Body Size | 18 |
| Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
| Shaft Radial Play Test Point | 0.125 INCHES MAXIMUM IN |
| Flange Diameter | 1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN |
| Undercut Width | 0.0780 INCHES NOMINAL IN |
| Shaft Diameter | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT IN |
| Rotor DC Resistance in Ohms | 420.00 NOMINAL |
| Undercut Diameter | 1.6220 INCHES MINIMUM AND 1.6280 INCHES MAXIMUM IN |
| Length | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM SHOULDER IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | STANDARD ROUND C |
| Shaft Radial Play Determining Weight | 16.0 OUNCES OZ |
| Flange Thickness | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM IN |
| Shaft Maximum Runout | 0.0008 INCHES IN |
| Stator Input Current Rating | 7.0 MILLIAMPERES MAXIMUM |
| Alignment Hole Bolt Circle Diameter | 1.2500 INCHES NOMINAL IN |
| Spline Tooth Quantity | 21 SINGLE SHAFT |
| Shaft Thread Length | 0.3550 INCHES MAXIMUM SINGLE SHAFT IN |
| Phase Shift Angle in Deg | 3.000 INPUT TO OUTPUT NOMINAL |
| Mounting Surface to Terminal End Distance | 2.5230 INCHES MAXIMUM IN |
| Frequency in Hertz | 400.0 NOMINAL |
| Stator Input Electrical Power Rating | 100.0 MILLIWATTS MAXIMUM |
| Terminal Location | REAR |
| Shaft End Play Determining Weight | 16.0 OUNCES OZ |
| Shaft Maximum Radial Play | 0.0008 INCHES IN |
| Schematic Diagram Designator | 1 Y-ROTOR, 1 STATOR |
| Alignment Hole Quantity | 4 |
| Zso Impedance Angle in Deg | 88.00 NOMINAL |
| Shaft Length | 0.3790 INCHES MINIMUM AND 0.3870 INCHES MAXIMUM SINGLE SHAFT IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| VCT18-4D1 | General Dynamics Motion Control Llc (USA) |
| 7627969P001 PRIMARY | Lockheed Martin Corporation Div Rms (USA) |
| 7627969P1 | Lockheed Martin Corporation Div Rms (USA) |
| Reference | Meaning |
|---|---|
| 7627969P001 | 5/9 Secondary reference Vernitron Corp |
NSN 5990-00-078-3182 is a Synchro,control Transformer, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5990, Synchros and Resolvers. Status: active.
NSN 5990-00-078-3182 has 3 manufacturer part numbers on file: VCT18-4D1 (General Dynamics Motion Control Llc), 7627969P001 (Lockheed Martin Corporation Div Rms), 7627969P1 (Lockheed Martin Corporation Div Rms).
Key specifications for 7627969P001: Body Size: 18; Shaft Type: SPLINE W/THREADS SINGLE SHAFT; Shaft Radial Play Test Point: 0.125 INCHES MAXIMUM IN; Flange Diameter: 1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.