PartsTable TECHNICAL DATA SHEET
NSN 5990-00-022-2945Government record, cited

Synchro, Receiver5990-00-022-2945

NSN 5990-00-022-2945 · NIIN 000222945
FSC 5990 — Synchros and Resolvers · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5990-00-022-2945 · 5990000222945 · NIIN 000222945 · 00-022-2945 · FSC 5990 Synchros and Resolvers · AY1105-17B1 · 1497520 · 11TR022-2945 · 1497520-0000 · 1497520-0000
Nearby stock numbers  ·
Features
  • Synchro,receiver — FSC 5990
  • Body Size: 11
  • Shaft Type: ROUND, TAPERED, HOLLOWED SINGLE SHAFT
  • Flange Diameter: 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
  • Undercut Width: 0.0500 INCHES NOMINAL IN
  • Shaft Diameter: 0.1220 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM SINGLE SHAFT IN
  • Rotor DC Resistance in Ohms: 18.00 NOMINAL
  • Undercut Diameter: 0.9750 INCHES NOMINAL IN
Identification
  • NSN: 5990-00-022-2945
  • NIIN: 000222945
  • FSC: 5990 — Synchros and Resolvers
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Synchro,receiver, cataloged under National Stock Number 5990-00-022-2945, is classified within Federal Supply Class 5990 (Synchros and Resolvers) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5990-00-022-2945
Item NameSynchro,receiver
FSC / FSG5990 / 59 — Synchros and Resolvers
StatusACTIVE
Body Size11
Shaft TypeROUND, TAPERED, HOLLOWED SINGLE SHAFT
Flange Diameter1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
Undercut Width0.0500 INCHES NOMINAL IN
Shaft Diameter0.1220 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM SINGLE SHAFT IN
Rotor DC Resistance in Ohms18.00 NOMINAL
Undercut Diameter0.9750 INCHES NOMINAL IN
Shaft Tapered End Minor Diameter0.1150 INCHES NOMINAL SINGLE SHAFT IN
Length0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM SHOULDER IN
Fragility FactorMODERATELY RUGGED
Body StyleSTANDARD ROUND C
Shaft Hole Diameter0.0897 INCHES NOMINAL SINGLE SHAFT IN
Flange Thickness0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
Torque Gradient Per Angular Deg2000.0 MILLIMETER-MILLIGRAMS MINIMUM MM
Rotor Input Electrical Power Rating600.0 MILLIWATTS NOMINAL
Alignment Hole Bolt Circle Diameter0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM IN
Phase Shift Angle in Deg4.300 INPUT TO OUTPUT NOMINAL
Mounting Surface to Terminal End Distance1.6200 INCHES NOMINAL IN
Frequency in Hertz400.0 NOMINAL
Zro Resistance in Ohms44.00 NOMINAL
Plus J Zso Reactance in Ohms40.50 NOMINAL
Zrs Resistance in Ohms57.00 NOMINAL
Terminal LocationREAR
Rotor Input Voltage Rating in Volts26.0 NOMINAL
Alignment Hole Quantity4
Shaft Length0.2500 INCHES NOMINAL SINGLE SHAFT IN
Body MaterialSTEEL CORROSION RESISTING
Pilot Diameter0.6249 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
Shoulder Diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
4920-01-089-353114975-20 POSSIBLE MATCH
TIE PLATE ASSEMBLY
Possible match (shared part number)Te Connectivity Corporation
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
AY1105-17B1 5/2 Secondary reference
U.S. Government activity
1497520 C/1 Advisory reference — outside the item-of-supply concept
Honeywell Intl Inc Defense Avionics Systems Former Bendix Flight Systems Fiv Montrose Opns
11TR022-2945 5/9 Secondary reference
Motion Devices Technology, Inc.
1497520-0000 3/2 Design control — primary reference
U.S. Government activity
1497520-0000 5/9 Secondary reference
Honeywell Intl Inc Defense Avionics Systems
AY1105-17B1 5/9 Secondary reference
Honeywell Intl Inc Defense Avionics Systems
Related Parts
4920-01-089-3531POSSIBLE MATCH
TIE PLATE ASSEMBLY
14975-20

Frequently Asked Questions

What is NSN 5990-00-022-2945?

NSN 5990-00-022-2945 is a Synchro,receiver, classified under FSC 5990, Synchros and Resolvers. Status: active.

What NSN replaces 5990-00-022-2945?

1 possible match (shared part number, not a government interchangeability claim): 4920-01-089-3531. Verify interchangeability with system specifications before substitution.

What are the specifications of 5990-00-022-2945?

Key specifications for 5990-00-022-2945: Body Size: 11; Shaft Type: ROUND, TAPERED, HOLLOWED SINGLE SHAFT; Flange Diameter: 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN; Undercut Width: 0.0500 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5990-00-022-2945 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5990-00-022-2945?

NSN 5990-00-022-2945 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com