The Adapter,antenna to Antenna Base, cataloged under National Stock Number 5985-01-595-7432, is classified within Federal Supply Class 5985 (Antennas, Waveguides, and Related Equipment) of the Electrical and Electronic Equipment Components group. The manufacturer of record is General Dynamics Mission Systems, Inc.. Government technical data includes 3 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5985-01-595-7432 |
| Primary Part Number | 82-2806287-1 |
| Item Name | Adapter,antenna to Antenna Base |
| FSC / FSG | 5985 / 59 — Antennas, Waveguides, and Related Equipment |
| Manufacturer | General Dynamics Mission Systems, Inc. |
| Status | ACTIVE |
| Overall Diameter | 1.050 INCHES NOMINAL IN |
| Material Document and Classification | MIL-DTL-25995 MIL SPEC SINGLE MATERIAL RESPONSE |
| Material | ALUMINUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL D — Destroy Item |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 82-2806287-1 PRIMARY | General Dynamics Mission Systems, Inc. (USA) |
NSN 5985-01-595-7432 is a Adapter,antenna to Antenna Base, manufactured by General Dynamics Mission Systems, Inc., classified under FSC 5985, Antennas, Waveguides, and Related Equipment. Status: active.
NSN 5985-01-595-7432 has 1 manufacturer part number on file: 82-2806287-1 (General Dynamics Mission Systems, Inc.).
Key specifications for 82-2806287-1: Overall Diameter: 1.050 INCHES NOMINAL IN; Material Document and Classification: MIL-DTL-25995 MIL SPEC SINGLE MATERIAL RESPONSE; Overall Length: 6.000 INCHES NOMINAL IN; Special Features: ADAPTER HAS MOUNTING THRU HOLE OF 0.387 TO 0.397 INCH DIAMETER LOCATED CENTERED 0.500 INCHES FROM ONE END; HAS ROUND ENDED SLOT CENTERED AT A POINT 2.880 INCHES FROM SAME END AND 2.380 INCHES FROM CENTER OF THRU HOLE HAVING A LENGTH OF 2.070 TO 2.130 INCHES AND A WIDTH OF 0.610 TO 0.640 INCHES; HAS MACHINE FLAT 0.32 INCHES WIDE AND 0.02 INCHES DEEP FOR A LENGTH OF 1.250 INCHES FROM OPPOSITE END CENTERED WITH ALREADY STATED OPENINGS IN. 3 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5985-01-595-7432 has DEMIL Code D. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.