PartsTable TECHNICAL DATA SHEET
NSN 5985-00-442-3195Government record, cited

Attenuator, Variable5985-00-442-3195

NSN 5985-00-442-3195 · NIIN 004423195
FSC 5985 — Antennas, Waveguides, and Related Equipment · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5985-00-442-3195 · 5985004423195 · NIIN 004423195 · 00-442-3195 · FSC 5985 Antennas, Waveguides, and Related Equipment
Nearby stock numbers  ·
Features
  • Attenuator,variable — FSC 5985
  • Shaft Type: ROUND
  • Insertion Loss at Minimum Attenuation in Maximum Decibels: 6.0
  • Impedance Rating in Ohms: 50.0 INPUT-OUTPUT
  • Mounting Facility Type and Quantity: 4 THREADED HOLE(S)
  • Frequency Range: 2.000 GIGAHERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM
  • Shaft Diameter: 0.250 INCHES MAXIMUM IN
  • Body Style: COAXIAL TYPE
Identification
  • NSN: 5985-00-442-3195
  • NIIN: 004423195
  • FSC: 5985 — Antennas, Waveguides, and Related Equipment
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Attenuator,variable, cataloged under National Stock Number 5985-00-442-3195, is classified within Federal Supply Class 5985 (Antennas, Waveguides, and Related Equipment) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5985-00-442-3195
Item NameAttenuator,variable
FSC / FSG5985 / 59 — Antennas, Waveguides, and Related Equipment
StatusACTIVE
Shaft TypeROUND
Insertion Loss at Minimum Attenuation in Maximum Decibels6.0
Impedance Rating in Ohms50.0 INPUT-OUTPUT
Mounting Facility Type and Quantity4 THREADED HOLE(S)
Frequency Range2.000 GIGAHERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM
Shaft Diameter0.250 INCHES MAXIMUM IN
Body StyleCOAXIAL TYPE
Mounting Facility PatternFOUR POSITION RECTANGULAR
Segment Attenuation Accuracy in Decibels-1.50 TO 1.50
Adjustment Device Type and Quantity1 SHAFT AND 1 KNOB
Center to Center Distance Between Mounting Facilities Parallel to Length3.800 INCHES MAXIMUM IN
Overall Attenuation Range in Decibels+0.0 TO 100.0
Voltage Standing Wave Ratio1.50
Segment Attenuation Range in Decibels+0.00 TO 100.00
Mounting Facility Screw Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Overall Attenuation Accuracy in Decibels-1.50 TO 1.50
Attenuation Variation MethodCONTINUOUS
Mounting Thread Quantity32 PER INCH
Shaft Length0.620 INCHES MAXIMUM IN
Mounting Facility Nominal Screw Thread Diameter0.164 INCHES IN
Operating Temp Range-10.0 TO 71.0 CELSIUS DEGC
Center to Center Distance Between Mounting Facilities Parallel to Width3.800 INCHES MAXIMUM IN
Test Data Document97942-138C225 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Application DesignTRANSMISSION LINE
Terminal Type and Quantity2 CONNECTOR, COAXIAL, FEMALE
Power Rating5.0 WATTS AVERAGE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
138C225H01 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5985 — Antennas, Waveguides, and Related Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5985-00-001-1854
ANTENNA
5985-00-001-1862
WAVEGUIDE ASSEMBLY
5985-00-001-1869
WAVEGUIDE ASSEMBLY
5985-00-001-1870
WAVEGUIDE ASSEMBLY
5985-00-001-1871
WAVEGUIDE ASSEMBLY
5985-00-001-1874
WAVEGUIDE ASSEMBLY
5985-00-001-1875
ADAPTER,WAVEGUIDE
5985-00-001-1876
WAVEGUIDE ASSEMBLY

Frequently Asked Questions

What is NSN 5985-00-442-3195?

NSN 5985-00-442-3195 is a Attenuator,variable, classified under FSC 5985, Antennas, Waveguides, and Related Equipment. Status: active.

What are the specifications of 5985-00-442-3195?

Key specifications for 5985-00-442-3195: Shaft Type: ROUND; Insertion Loss at Minimum Attenuation in Maximum Decibels: 6.0; Impedance Rating in Ohms: 50.0 INPUT-OUTPUT; Mounting Facility Type and Quantity: 4 THREADED HOLE(S). 26 specifications are documented in the U.S. Government catalog.

Is NSN 5985-00-442-3195 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5985-00-442-3195?

NSN 5985-00-442-3195 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com