PartsTable
Technical Data Sheet
598-516-1894231REVAITEM9 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, departure_from_cited_designator: AS MODIFIED BY MATERIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-542-1717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
598-516-1894231REVAITEM9
NSN: 5330-00-542-1717
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
cross-sectional_height0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
departure_from_cited_designatorAS MODIFIED BY MATERIAL
NSN5330-00-542-1717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 598-516-1894231REVAITEM9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY MATERIAL
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
100A122Interchangeable
interchangeable cross-reference
interchangeable
5330008037208Interchangeable
interchangeable cross-reference
interchangeable
GHN10093-4Interchangeable
interchangeable cross-reference
interchangeable
19A11C02Interchangeable
interchangeable cross-reference
interchangeable
AN6290-2Interchangeable
Same NIIN cross-reference
interchangeable
593-518-1862913PC6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 598-516-1894231REVAITEM9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 598-516-1894231REVAITEM9?
598-516-1894231REVAITEM9 is a PACKING,PREFORMED.
What parts can replace 598-516-1894231REVAITEM9?
There are 10 known substitutes for 598-516-1894231REVAITEM9: 100A122, 5330008037208, GHN10093-4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 598-516-1894231REVAITEM9?
598-516-1894231REVAITEM9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-542-1717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 598-516-1894231REVAITEM9