PartsTable
Technical Data Sheet
Download PDF

5979192 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5979192: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: EXTENDED FLAT, first_leg_width: 3.250 INCHES NOMINAL IN, first_leg_length: 3.150 INCHES NOMINAL IN, second_leg_angle: 100.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-314-0092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5979192
NSN: 5340-01-314-0092
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1018
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEXTENDED FLAT
first_leg_width3.250 INCHES NOMINAL IN
first_leg_length3.150 INCHES NOMINAL IN
second_leg_angle100.0 DEGREES NOMINAL
second_leg_styleCHAMFERED ENDS
second_leg_width1.500 INCHES NOMINAL IN
special_featuresFRIST LEG IRREGULAR SHAPE
style_designatorDOUBLE ANGLE
second_leg_length5.750 INCHES NOMINAL IN
surface_treatmentENAMEL SEMIGLOSS
NSN5340-01-314-0092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5979192 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.620 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.150 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.529 INCHES MINIMUM AND 0.543 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 100.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.620 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.150 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.529 INCHES MINIMUM AND 0.543 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE100.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.263 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONTT-E-490 FED SPEC SINGLE TREATMENT RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5979192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5979192?
5979192 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 5979192?
5979192 is cataloged in the U.S. Government catalog under NSN 5340-01-314-0092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5979192