The Stuffing Tube, cataloged under National Stock Number 5975-01-118-6802, is classified within Federal Supply Class 5975 (Electrical Hardware and Supplies) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Glenair, Inc.. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5975-01-118-6802 |
| Primary Part Number | G1351B-23 |
| Item Name | Stuffing Tube |
| FSC / FSG | 5975 / 59 — Electrical Hardware and Supplies |
| Manufacturer | Glenair, Inc. |
| Status | ACTIVE |
| Item Accommodated Maximum Thickness | 0.125 INCHES IN |
| Mounting Method | FLANGE |
| Mounting Hole Diameter | 0.173 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND BOTH ENDS |
| Center to Center Distance Between Mounting Holes Along Width | 2.625 INCHES NOMINAL IN |
| Nominal Thread Size | 2.500 INCHES FIRST END IN |
| Packing Chamber Quantity | 1 |
| Center to Center Distance Between Mounting Holes Along Length | 2.625 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM OVERALL |
| Thread Class | 2A FIRST END A |
| Thread Quantity Per Inch | 16 FIRST END |
| Bore Diameter | 1.875 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY OVERALL |
| Thread Series Designator | UN FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| G1351B-23 PRIMARY | Glenair, Inc. (USA) |
NSN 5975-01-118-6802 is a Stuffing Tube, manufactured by Glenair, Inc., classified under FSC 5975, Electrical Hardware and Supplies. Status: active.
NSN 5975-01-118-6802 has 1 manufacturer part number on file: G1351B-23 (Glenair, Inc.).
Key specifications for G1351B-23: Item Accommodated Maximum Thickness: 0.125 INCHES IN; Mounting Method: FLANGE; Mounting Hole Diameter: 0.173 INCHES NOMINAL IN; Overall Length: 4.275 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.