The Conduit Assembly,nonmetallic,ele, cataloged under National Stock Number 5975-01-110-7502, is classified within Federal Supply Class 5975 (Electrical Hardware and Supplies) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Glenair, Inc.. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5975-01-110-7502 |
| Primary Part Number | GA114-2 |
| Item Name | Conduit Assembly,nonmetallic,ele |
| FSC / FSG | 5975 / 59 — Electrical Hardware and Supplies |
| Manufacturer | Glenair, Inc. |
| Status | ACTIVE |
| Terminal End Deflection Angle | 45.0 DEGREES NOMINAL FIRST END |
| Measuring Method and Length | 61.875 INCHES NOMINAL WORKING IN |
| Body Outside Diameter | 0.660 INCHES MAXIMUM IN |
| Flexibility | FLEXIBLE |
| Terminal End Type | PLAIN FERRULE W/COUPLING NUT SECOND END |
| Terminal End Type | ELBOW W/COUPLING NUT AND PLAIN FERRULE FIRST END |
| Body Inside Diameter | 0.450 INCHES MINIMUM IN |
| Material | ALUMINUM COMPLETE END FITTING |
| Hazardous Locations/environmental Protection | WATERTIGHT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GA114-2 PRIMARY | Glenair, Inc. (USA) |
| Reference | Meaning |
|---|---|
| C8922-20 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5975-01-110-7502 is a Conduit Assembly,nonmetallic,ele, manufactured by Glenair, Inc., classified under FSC 5975, Electrical Hardware and Supplies. Status: active.
NSN 5975-01-110-7502 has 1 manufacturer part number on file: GA114-2 (Glenair, Inc.).
Key specifications for GA114-2: Terminal End Deflection Angle: 45.0 DEGREES NOMINAL FIRST END; Measuring Method and Length: 61.875 INCHES NOMINAL WORKING IN; Body Outside Diameter: 0.660 INCHES MAXIMUM IN; Flexibility: FLEXIBLE. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.