PartsTable
Technical Data Sheet
Download PDF

597055 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

597055: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 0.6663 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-365-4776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
597055
NSN: 3110-00-365-4776
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width0.6663 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
material_document_and_classificationPWA 725,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE BALL
NSN3110-00-365-4776
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 597055 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: PWA 725,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE BALL
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONPWA 725,FSCM 77445 MFR REF SINGLE MATERIAL RESPONSE BALL
OVERALL WIDTH0.6663 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SUBSTITUTES & CROSS-REFERENCES 1
597056Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 597055?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 597055?
597055 is a BEARING,BALL,ANNULAR.
What parts can replace 597055?
There is 1 known substitute for 597055: 597056. Substitute compatibility should be verified for your specific system.
What is the NSN for 597055?
597055 is cataloged in the U.S. Government catalog under NSN 3110-00-365-4776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 597055