The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-01-726-4553, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Glenair, Inc.. Government technical data includes 7 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-726-4553 |
| Primary Part Number | 770-001S207W1 |
| Item Name | Insulation Sleeving,electrical,s |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Manufacturer | Glenair, Inc. |
| Status | ACTIVE |
| Main Body Small End Inside Diameter | 0.394 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Large End Inside Diameter | 1.102 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Large End Wall Thickness of Main Body | 0.087 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Style Designator | BOOT-STRAIGHT |
| Small End Wall Thickness of Main Body | 0.0408 INCHES MINIMUM AND 0.0612 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Overall Length | 3.5082 INCHES MINIMUM AND 4.2878 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Wall Thickness | 0.0609 INCHES MINIMUM AND 0.1131 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 770-001S207W1 PRIMARY | Glenair, Inc. (USA) |
NSN 5970-01-726-4553 is a Insulation Sleeving,electrical,s, manufactured by Glenair, Inc., classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
NSN 5970-01-726-4553 has 1 manufacturer part number on file: 770-001S207W1 (Glenair, Inc.).
Key specifications for 770-001S207W1: Main Body Small End Inside Diameter: 0.394 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Large End Inside Diameter: 1.102 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Large End Wall Thickness of Main Body: 0.087 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN; Style Designator: BOOT-STRAIGHT. 7 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.