The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-01-432-6466, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-432-6466 |
| Primary Part Number | MS3117-12CU |
| Item Name | Insulation Sleeving,electrical,s |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Main Body Small End Inside Diameter | 0.260 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Small End Inside Diameter | 0.580 INCHES MINIMUM AS SUPPLIED IN |
| Angle Between Large End and Small End Centerlines in Deg | 90.0 NOMINAL AS SUPPLIED |
| Temp Rating | -55.0 CELSIUS AND 200.0 CELSIUS DEGC |
| Main Body Large End Inside Diameter | 1.120 INCHES MINIMUM AS SUPPLIED IN |
| Main Body Large End Inside Diameter | 0.560 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Large End Wall Thickness of Main Body | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Style Designator | BOOT-90 DEGREES |
| Flexibility | FLEXIBLE |
| Material Document and Classification | MIL-I-81765/4 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| Small End Wall Thickness of Main Body | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Height | 1.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Dielectric Material Voltage Rating Per Unit Thickness | 200.0 VOLTS PER MIL /0.001 INCH/ IN |
| Reliability Indicator | NOT ESTABLISHED |
| Color | BLACK |
| Environmental Protection | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| Minimum Tensile Strength | 1800 POUNDS PER SQUARE INCH LBS |
| Material | PLASTIC FLUOROCARBON LOCATION NOT OTHERWISE SPECIFIED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| MS3117-12CU PRIMARY | Sae International Dba Sae International (USA) |
| Reference | Meaning |
|---|---|
| AS31171 | 5/9 Secondary reference U.S. Government activity |
| MS3117-12CU | 5/9 Secondary reference U.S. Government activity |
| AS31171 | 5/1 Secondary reference Sae International Dba Sae International |
| MS3117-12CU | 3/9 Design control — primary reference U.S. Government activity |
NSN 5970-01-432-6466 is a Insulation Sleeving,electrical,s, manufactured by Sae International Dba Sae International, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
NSN 5970-01-432-6466 has 1 manufacturer part number on file: MS3117-12CU (Sae International Dba Sae International).
Key specifications for MS3117-12CU: Main Body Small End Inside Diameter: 0.260 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Small End Inside Diameter: 0.580 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AS SUPPLIED; Temp Rating: -55.0 CELSIUS AND 200.0 CELSIUS DEGC. 18 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.