The Insulator,plate, cataloged under National Stock Number 5970-01-235-1539, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-235-1539 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| First End Radius | 0.148 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Fifth Hole Spacing | 0.215 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN |
| First Hole Diameter | 0.141 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| Third Hole Spacing | 1.187 INCHES NOMINAL IN |
| Style Designator | FLAT, DIAMOND |
| First Side Radius | 0.545 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Second Hole Spacing | 0.593 INCHES NOMINAL IN |
| Second Hole Diameter | 0.047 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN |
| Fourth Hole Spacing | 0.430 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN |
| First Hole Spacing | 0.148 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| Material | RUBBER SILICONE CLASS Q OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 640097P17 | 7/2 Vendor item drawing reference U.S. Government activity |
| 7403-09FR-23 | 3/9 Design control — primary reference Henkel Corporation |
NSN 5970-01-235-1539 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-235-1539: Overall Height: 0.009 INCHES NOMINAL IN; First End Radius: 0.148 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN; Fifth Hole Spacing: 0.215 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN; First Hole Diameter: 0.141 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.