The Insulator,plate, cataloged under National Stock Number 5970-01-214-0279, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-214-0279 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| First End Radius | 0.140 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN |
| Fifth Hole Spacing | 0.100 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN |
| First Hole Diameter | 0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN |
| Third Hole Spacing | 0.960 INCHES NOMINAL IN |
| Style Designator | FLAT, DIAMOND |
| First Side Radius | 0.350 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN |
| Second Hole Spacing | 0.365 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Second Hole Diameter | 0.047 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN |
| Fourth Hole Spacing | 0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN |
| First Hole Spacing | 0.140 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN |
| Material | RUBBER SYNTHETIC OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7403-09FR-30 | 3/9 Design control — primary reference Henkel Corporation |
| 640097P2 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5970-01-214-0279 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-214-0279: Overall Height: 0.008 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN; First End Radius: 0.140 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN; Fifth Hole Spacing: 0.100 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN; First Hole Diameter: 0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.