The Insulator,plate, cataloged under National Stock Number 5970-01-166-1782, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-166-1782 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| First End Radius | 0.205 INCHES NOMINAL IN |
| Fifth Hole Spacing | 0.100 INCHES NOMINAL IN |
| First Hole Diameter | 0.208 INCHES NOMINAL IN |
| Third Hole Spacing | 0.960 INCHES NOMINAL IN |
| Style Designator | FLAT, DIAMOND |
| First Side Radius | 0.410 INCHES NOMINAL IN |
| Material Document and Classification | QQ-A-250/8, ALLOY 5052, TEMPER H38 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Second Hole Spacing | 0.580 INCHES NOMINAL IN |
| Second Hole Diameter | 0.128 INCHES NOMINAL IN |
| Fourth Hole Spacing | 0.200 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 5052 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 12707750 | 7/2 Vendor item drawing reference Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| 172-HC | 3/9 Design control — primary reference Eg and G Wakefield Engineering |
NSN 5970-01-166-1782 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-166-1782: Overall Height: 0.085 INCHES NOMINAL IN; First End Radius: 0.205 INCHES NOMINAL IN; Fifth Hole Spacing: 0.100 INCHES NOMINAL IN; First Hole Diameter: 0.208 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.