PartsTable TECHNICAL DATA SHEET
NSN 5970-01-122-8214Government record, cited

Insulation Sleeving, Electrical, S5970-01-122-8214

NSN 5970-01-122-8214 · NIIN 011228214 · Part number MS3117-15BC
Sae International Dba Sae International · FSC 5970 — Electrical Insulators and Insulating Materials · FSG 59 — Electrical and Electronic Equipment Components · CAGE 0U583
Government record, cited
NSN 5970-01-122-8214 — this item is cataloged by the U.S. Government under National Stock Number 5970-01-122-8214. Manufacturer of record part number: MS3117-15BC.
Also searched as  5970-01-122-8214 · 5970011228214 · NIIN 011228214 · 01-122-8214 · FSC 5970 Electrical Insulators and Insulating Materials · CAGE 0U583 · MS3117-15BC · AS31171 · AS31171
Nearby stock numbers  ·
Features
  • Insulation Sleeving,electrical,s — FSC 5970
  • Main Body Small End Inside Diameter: 0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
  • Main Body Small End Inside Diameter: 1.680 INCHES MINIMUM AS SUPPLIED IN
  • Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY
  • Angle Between Large End and Small End Centerlines in Deg: 180.0 NOMINAL AS SUPPLIED
  • Temp Rating: -55.0 CELSIUS AND 135.0 CELSIUS DEGC
  • Main Body Large End Inside Diameter: 1.680 INCHES MINIMUM AS SUPPLIED IN
  • Main Body Large End Inside Diameter: 1.110 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Identification
  • NSN: 5970-01-122-8214
  • NIIN: 011228214
  • FSC: 5970 — Electrical Insulators and Insulating Materials
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: MS3117-15BC
  • Manufacturer: Sae International Dba Sae International
General Description

The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-01-122-8214, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5970-01-122-8214
Primary Part NumberMS3117-15BC
Item NameInsulation Sleeving,electrical,s
FSC / FSG5970 / 59 — Electrical Insulators and Insulating Materials
ManufacturerSae International Dba Sae International
StatusACTIVE
Main Body Small End Inside Diameter0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Main Body Small End Inside Diameter1.680 INCHES MINIMUM AS SUPPLIED IN
Angle Between Large End and Small End Centerlines in Deg90.0 NOMINAL AFTER UNRESTRICTED RECOVERY
Angle Between Large End and Small End Centerlines in Deg180.0 NOMINAL AS SUPPLIED
Temp Rating-55.0 CELSIUS AND 135.0 CELSIUS DEGC
Main Body Large End Inside Diameter1.680 INCHES MINIMUM AS SUPPLIED IN
Main Body Large End Inside Diameter1.110 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Large End Wall Thickness of Main Body0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Style DesignatorBOOT-90 DEGREES
FlexibilitySEMIRIGID
Material Document and ClassificationMIL-I-81765/1,TYPE I MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
Small End Wall Thickness of Main Body0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Height1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Dielectric Material Voltage Rating Per Unit Thickness200.0 VOLTS PER MIL /0.001 INCH/ IN
ColorBLACK
Environmental ProtectionCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT
Minimum Tensile Strength1500 POUNDS PER SQUARE INCH LBS
MaterialPLASTIC CROSS-LINKED POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5970-01-123-0280MS3117-02BC POSSIBLE MATCH
INSULATION SLEEVING,ELECTRICAL,S
Possible match (shared part number)Sae International Dba Sae International
5970-01-180-4894S3117-15AU POSSIBLE MATCH
INSULATION SLEEVING,ELECTRICAL,S
Possible match (shared part number)Sae International Dba Sae International
Cross-Reference Index
Part NumberManufacturer
MS3117-15BC PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
MS3117-15BC 3/9 Design control — primary reference
U.S. Government activity
MS3117-15BC 5/9 Secondary reference
U.S. Government activity
AS31171 5/9 Secondary reference
U.S. Government activity
AS31171 5/1 Secondary reference
Sae International Dba Sae International
Related Parts
5970-01-123-0280POSSIBLE MATCH
INSULATION SLEEVING,ELECTRICAL,S
MS3117-02BC
5970-01-180-4894POSSIBLE MATCH
INSULATION SLEEVING,ELECTRICAL,S
S3117-15AU

Frequently Asked Questions

What is NSN 5970-01-122-8214?

NSN 5970-01-122-8214 is a Insulation Sleeving,electrical,s, manufactured by Sae International Dba Sae International, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.

What part numbers are listed for NSN 5970-01-122-8214?

NSN 5970-01-122-8214 has 1 manufacturer part number on file: MS3117-15BC (Sae International Dba Sae International).

What NSN replaces 5970-01-122-8214?

2 possible matches (shared part number, not a government interchangeability claim): 5970-01-123-0280, 5970-01-180-4894. Verify interchangeability with system specifications before substitution.

What are the specifications of MS3117-15BC?

Key specifications for MS3117-15BC: Main Body Small End Inside Diameter: 0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Small End Inside Diameter: 1.680 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY; Angle Between Large End and Small End Centerlines in Deg: 180.0 NOMINAL AS SUPPLIED. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5970-01-122-8214 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com