The Insulator,plate, cataloged under National Stock Number 5970-01-116-4822, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-116-4822 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| Surface Treatment and Location | TRANSISTOR SIDE ONLY,EDGES AND INSIDE THE HOLES COATED WITH DELTA COATE 151H,ED AND G WAKEFIELD ENGINEERING CO |
| First End Radius | 0.205 INCHES NOMINAL IN |
| Fifth Hole Spacing | 0.100 INCHES NOMINAL IN |
| First Hole Diameter | 0.208 INCHES NOMINAL IN |
| Third Hole Spacing | 0.960 INCHES NOMINAL IN |
| Style Designator | FLAT, DIAMOND |
| First Side Radius | 0.410 INCHES NOMINAL IN |
| Second Hole Spacing | 0.580 INCHES NOMINAL IN |
| Second Hole Diameter | 0.128 INCHES NOMINAL IN |
| Fourth Hole Spacing | 0.200 INCHES NOMINAL IN |
| First Hole Spacing | 0.205 INCHES NOMINAL IN |
| Material | OVERALL ALUMINUM 5052-H38,EG AND G WAKEFIELD ENGINEERING CO |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 172-DC | 3/9 Design control — primary reference Eg and G Wakefield Engineering |
NSN 5970-01-116-4822 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-116-4822: Overall Height: 0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN; Surface Treatment and Location: TRANSISTOR SIDE ONLY,EDGES AND INSIDE THE HOLES COATED WITH DELTA COATE 151H,ED AND G WAKEFIELD ENGINEERING CO; First End Radius: 0.205 INCHES NOMINAL IN; Fifth Hole Spacing: 0.100 INCHES NOMINAL IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.