The Insulator,plate, cataloged under National Stock Number 5970-01-094-0347, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-094-0347 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| First End Radius | 0.189 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN |
| Fifth Hole Spacing | 0.100 INCHES NOMINAL IN |
| First Hole Diameter | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN |
| Third Hole Spacing | 0.958 INCHES MINIMUM AND 0.962 INCHES MAXIMUM IN |
| Style Designator | FLAT, DIAMOND |
| First Side Radius | 0.390 INCHES NOMINAL IN |
| Second Hole Spacing | 0.580 INCHES NOMINAL IN |
| Second Hole Diameter | 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN |
| Fourth Hole Spacing | 0.200 INCHES NOMINAL IN |
| First Hole Spacing | 0.189 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN |
| Environmental Protection | MOISTURE RESISTANT AND SOLVENT RESISTANT |
| Material | MICA OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 14B52600F08 | 5/9 Secondary reference Freescale Semiconductor, Inc. |
| 10279453-4 | 7/2 Vendor item drawing reference Us Army Aviation and Missile Command |
| 14BSB52600F008 | 3/9 Design control — primary reference Freescale Semiconductor, Inc. |
NSN 5970-01-094-0347 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-094-0347: Overall Height: 0.002 INCHES NOMINAL IN; First End Radius: 0.189 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN; Fifth Hole Spacing: 0.100 INCHES NOMINAL IN; First Hole Diameter: 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.