The Insulator,plate, cataloged under National Stock Number 5970-01-047-6936, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-047-6936 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| Fourth Hole Diameter | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Fifth Hole Spacing | 1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN |
| First Hole Diameter | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Third Hole Spacing | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN |
| Third Hole Diameter | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Style Designator | FLAT, RECTANGULAR |
| Material Document and Classification | MIL-P-18177, TYPE GEB MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Second Hole Spacing | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN |
| Second Hole Diameter | 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN |
| Fourth Hole Spacing | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| First Hole Spacing | 0.148 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN |
| Material | GLASS FIBER AND PLASTIC EPOXY OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 10051228-101 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5970-01-047-6936 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-01-047-6936: Overall Height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN; Fourth Hole Diameter: 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN; Fifth Hole Spacing: 1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN; First Hole Diameter: 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.