The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-01-046-9853, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Whitmor Plastic Wire & Cable Corp. Dba Whitmor Wirenetics. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-01-046-9853 |
| Primary Part Number | 1101-1-J |
| Item Name | Insulation Sleeving,electrical,s |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Manufacturer | Whitmor Plastic Wire & Cable Corp. Dba Whitmor Wirenetics |
| Status | ACTIVE |
| Main Body Small End Inside Diameter | 0.370 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Small End Inside Diameter | 1.730 INCHES MINIMUM AS SUPPLIED IN |
| Angle Between Large End and Small End Centerlines in Deg | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| Angle Between Large End and Small End Centerlines in Deg | 180.0 NOMINAL AS SUPPLIED |
| Temp Rating | -75.0 CELSIUS DEGC |
| Distance From Top of Shoulder to Small End of Main Body | 0.680 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Main Body Large End Inside Diameter | 1.080 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Large End Inside Diameter | 1.730 INCHES MINIMUM AS SUPPLIED IN |
| Large End Wall Thickness of Main Body | 0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Style Designator | BOOT-90 DEGREES |
| Flexibility | FLEXIBLE |
| Material Document and Classification | RT-602,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| Small End Wall Thickness of Main Body | 0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Height | 1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Dielectric Material Voltage Rating Per Unit Thickness | 200.0 VOLTS PER MIL /0.001 INCH/ IN |
| Distance From Intersecting Centerlines to Edge of Small End | 2.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Reliability Indicator | NOT ESTABLISHED |
| Color | BLACK |
| Environmental Protection | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| Minimum Tensile Strength | 600 POUNDS PER SQUARE INCH LBS |
| Material | RUBBER SILICONE LOCATION NOT OTHERWISE SPECIFIED |
| Distance From Centerline of Small End to Edge of Large End | 1.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1101-1-J | Hellermanntyton Limited Dba Staeng (GBR) |
| 1101-1-J PRIMARY | Whitmor Plastic Wire & Cable Corp. Dba Whitmor Wirenetics (USA) |
| 222A163-6 PRIMARY | Te Connectivity Corporation Dba Raychem Product Division (USA) |
| 1101-1-J PRIMARY | Reuben Burton, Incorporated (USA) |
| Reference | Meaning |
|---|---|
| 333H274-6 | 5/9 Secondary reference 3m Co Admininistrative Electronic & Communications |
| 333H274-6 | 5/9 Secondary reference 3m Company |
| 967919-6C | 7/1 Vendor item drawing reference U.S. Government activity |
NSN 5970-01-046-9853 is a Insulation Sleeving,electrical,s, manufactured by Whitmor Plastic Wire & Cable Corp. Dba Whitmor Wirenetics, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
NSN 5970-01-046-9853 has 4 manufacturer part numbers on file: 1101-1-J (Hellermanntyton Limited Dba Staeng), 1101-1-J (Whitmor Plastic Wire & Cable Corp. Dba Whitmor Wirenetics), 222A163-6 (Te Connectivity Corporation Dba Raychem Product Division), 1101-1-J (Reuben Burton, Incorporated).
Key specifications for 1101-1-J: Main Body Small End Inside Diameter: 0.370 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Small End Inside Diameter: 1.730 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY; Angle Between Large End and Small End Centerlines in Deg: 180.0 NOMINAL AS SUPPLIED. 22 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.