PartsTable TECHNICAL DATA SHEET
NSN 5970-00-923-0755Government record, cited

Insulation Sleeving, Electrical, S5970-00-923-0755

NSN 5970-00-923-0755 · NIIN 009230755 · Part number SS7073-1005
Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp · FSC 5970 — Electrical Insulators and Insulating Materials · FSG 59 — Electrical and Electronic Equipment Components · CAGE 78286
Government record, cited
NSN 5970-00-923-0755 — this item is cataloged by the U.S. Government under National Stock Number 5970-00-923-0755. Manufacturer of record part number: SS7073-1005.
Also searched as  5970-00-923-0755 · 5970009230755 · NIIN 009230755 · 00-923-0755 · FSC 5970 Electrical Insulators and Insulating Materials · CAGE 78286 · SS7073-1005 · 1101-2-B7 · 333H174-1 · 222A063-3 · 1101-2-B7
Nearby stock numbers  ·
Features
  • Insulation Sleeving,electrical,s — FSC 5970
  • Main Body Small End Inside Diameter: 0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
  • Main Body Small End Inside Diameter: 0.840 INCHES MINIMUM AS SUPPLIED IN
  • Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY
  • Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AS SUPPLIED
  • Temp Rating: -55.0 CELSIUS AND 225.0 CELSIUS DEGC
  • Dielectric Withstanding Voltage in Volts: 200.0
  • Main Body Large End Inside Diameter: 1.110 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Identification
  • NSN: 5970-00-923-0755
  • NIIN: 009230755
  • FSC: 5970 — Electrical Insulators and Insulating Materials
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: SS7073-1005
  • Manufacturer: Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp
General Description

The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-00-923-0755, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5970-00-923-0755
Primary Part NumberSS7073-1005
Item NameInsulation Sleeving,electrical,s
FSC / FSG5970 / 59 — Electrical Insulators and Insulating Materials
ManufacturerSikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp
StatusACTIVE
Main Body Small End Inside Diameter0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Main Body Small End Inside Diameter0.840 INCHES MINIMUM AS SUPPLIED IN
Angle Between Large End and Small End Centerlines in Deg90.0 NOMINAL AFTER UNRESTRICTED RECOVERY
Angle Between Large End and Small End Centerlines in Deg45.0 NOMINAL AS SUPPLIED
Temp Rating-55.0 CELSIUS AND 225.0 CELSIUS DEGC
Dielectric Withstanding Voltage in Volts200.0
Main Body Large End Inside Diameter1.110 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN
Main Body Large End Inside Diameter1.490 INCHES MINIMUM AS SUPPLIED IN
Large End Wall Thickness of Main Body0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Style DesignatorBOOT-90 DEGREES
FlexibilitySEMIRIGID
Material Document and ClassificationRT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE OR MPP-262,HIGH VOLTAGE ENGINEERING CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
Small End Wall Thickness of Main Body0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Height1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Distance From Intersecting Centerlines to Edge of Small End2.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Reliability IndicatorNOT ESTABLISHED
ColorBLACK
Environmental ProtectionCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
Minimum Tensile Strength1500 POUNDS PER SQUARE INCH LBS
MaterialPLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
Distance From Centerline of Small End to Edge of Large End1.140 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
SS7073-1005 Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp (USA)
1101-2-B7 Hellermanntyton Limited Dba Staeng (GBR)
Reference documents
ReferenceMeaning
1101-2-B7 5/9 Secondary reference
Hellermanntyton Limited
333H174-1 5/9 Secondary reference
3m Company
222A063-3 5/9 Secondary reference
Te Connectivity Corporation Dba Raychem Product Division
333H174-1 3/9 Design control — primary reference
3m Company Dba 3m
No interchangeability data on file.
Other items in FSC 5970 — Electrical Insulators and Insulating Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5970-00-001-1330
5970-00-001-1330 · Item name not on file
5970-00-001-1357
INSULATOR,BUSHING
5970-00-001-1418
INSULATOR,BUSHING
5970-00-001-1420
INSULATOR,PLATE
5970-00-001-1472
INSULATOR,PLATE
5970-00-001-1476
INSULATOR,WASHER
5970-00-001-1477
5970-00-001-1477 · Item name not on file
5970-00-001-1479
5970-00-001-1479 · Item name not on file

Frequently Asked Questions

What is NSN 5970-00-923-0755?

NSN 5970-00-923-0755 is a Insulation Sleeving,electrical,s, manufactured by Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.

What part numbers are listed for NSN 5970-00-923-0755?

NSN 5970-00-923-0755 has 2 manufacturer part numbers on file: SS7073-1005 (Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp), 1101-2-B7 (Hellermanntyton Limited Dba Staeng).

What are the specifications of SS7073-1005?

Key specifications for SS7073-1005: Main Body Small End Inside Diameter: 0.390 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Small End Inside Diameter: 0.840 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY; Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AS SUPPLIED. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5970-00-923-0755 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com