PartsTable TECHNICAL DATA SHEET
NSN 5970-00-450-3676Government record, cited

Insulation Sleeving, Electrical, S5970-00-450-3676

NSN 5970-00-450-3676 · NIIN 004503676 · Part number 243A022-3-02-0
Te Connectivity Corporation Dba Raychem Product Division · FSC 5970 — Electrical Insulators and Insulating Materials · FSG 59 — Electrical and Electronic Equipment Components · CAGE 06090
Government record, cited
NSN 5970-00-450-3676 — this item is cataloged by the U.S. Government under National Stock Number 5970-00-450-3676. Manufacturer of record part number: 243A022-3-02-0.
Also searched as  5970-00-450-3676 · 5970004503676 · NIIN 004503676 · 00-450-3676 · FSC 5970 Electrical Insulators and Insulating Materials · CAGE 06090 · 243A022-3-02-0 · 1803-10-87 · 5970PL2124868 · C2023-3-1 · 5970PL1517380
Nearby stock numbers  ·
Features
  • Insulation Sleeving,electrical,s — FSC 5970
  • Main Body Small End Inside Diameter: 0.460 INCHES MINIMUM AS SUPPLIED IN
  • Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AFTER UNRESTRICTED RECOVERY
  • Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AS SUPPLIED
  • Temp Rating: -55.0 CELSIUS DEGC
  • Main Body Large End Inside Diameter: 0.940 INCHES MINIMUM AS SUPPLIED IN
  • Large End Wall Thickness of Main Body: 0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
  • Large End Wall Thickness of Main Body: 0.110 INCHES MAXIMUM AS SUPPLIED IN
Identification
  • NSN: 5970-00-450-3676
  • NIIN: 004503676
  • FSC: 5970 — Electrical Insulators and Insulating Materials
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 243A022-3-02-0
  • Manufacturer: Te Connectivity Corporation Dba Raychem Product Division
General Description

The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-00-450-3676, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Te Connectivity Corporation Dba Raychem Product Division. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5970-00-450-3676
Primary Part Number243A022-3-02-0
Item NameInsulation Sleeving,electrical,s
FSC / FSG5970 / 59 — Electrical Insulators and Insulating Materials
ManufacturerTe Connectivity Corporation Dba Raychem Product Division
StatusACTIVE
Main Body Small End Inside Diameter0.460 INCHES MINIMUM AS SUPPLIED IN
Angle Between Large End and Small End Centerlines in Deg45.0 NOMINAL AFTER UNRESTRICTED RECOVERY
Angle Between Large End and Small End Centerlines in Deg45.0 NOMINAL AS SUPPLIED
Temp Rating-55.0 CELSIUS DEGC
Main Body Large End Inside Diameter0.940 INCHES MINIMUM AS SUPPLIED IN
Large End Wall Thickness of Main Body0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Large End Wall Thickness of Main Body0.110 INCHES MAXIMUM AS SUPPLIED IN
FlexibilitySEMIRIGID
Material Document and ClassificationRT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
Small End Wall Thickness of Main Body0.090 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
Small End Wall Thickness of Main Body0.090 INCHES MAXIMUM AS SUPPLIED IN
Dielectric Material Voltage Rating Per Unit Thickness200.0 VOLTS PER MIL /0.001 INCH/ IN
Reliability IndicatorNOT ESTABLISHED
ColorBLACK
Environmental ProtectionCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
Minimum Tensile Strength1500 POUNDS PER SQUARE INCH LBS
MaterialPLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
1803-10-87 Hellermanntyton Limited Dba Staeng (GBR)
243A022-3-02-0 PRIMARY Te Connectivity Corporation Dba Raychem Product Division (USA)
Reference documents
ReferenceMeaning
5970PL2124868 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
C2023-3-1 7/2 Vendor item drawing reference
U.S. Government activity
5970PL1517380 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
243A022-3-02 5/9 Secondary reference
Te Connectivity Corporation Dba Raychem Product Division
No interchangeability data on file.
Other items in FSC 5970 — Electrical Insulators and Insulating Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5970-00-001-1330
5970-00-001-1330 · Item name not on file
5970-00-001-1357
INSULATOR,BUSHING
5970-00-001-1418
INSULATOR,BUSHING
5970-00-001-1420
INSULATOR,PLATE
5970-00-001-1472
INSULATOR,PLATE
5970-00-001-1476
INSULATOR,WASHER
5970-00-001-1477
5970-00-001-1477 · Item name not on file
5970-00-001-1479
5970-00-001-1479 · Item name not on file

Frequently Asked Questions

What is NSN 5970-00-450-3676?

NSN 5970-00-450-3676 is a Insulation Sleeving,electrical,s, manufactured by Te Connectivity Corporation Dba Raychem Product Division, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.

What part numbers are listed for NSN 5970-00-450-3676?

NSN 5970-00-450-3676 has 2 manufacturer part numbers on file: 1803-10-87 (Hellermanntyton Limited Dba Staeng), 243A022-3-02-0 (Te Connectivity Corporation Dba Raychem Product Division).

What are the specifications of 243A022-3-02-0?

Key specifications for 243A022-3-02-0: Main Body Small End Inside Diameter: 0.460 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AFTER UNRESTRICTED RECOVERY; Angle Between Large End and Small End Centerlines in Deg: 45.0 NOMINAL AS SUPPLIED; Temp Rating: -55.0 CELSIUS DEGC. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5970-00-450-3676 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com