The Insulator,plate, cataloged under National Stock Number 5970-00-445-8086, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-00-445-8086 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Status | ACTIVE |
| First Slot Width | 0.550 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN |
| First Hole Diameter | 0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN |
| Third Hole Spacing | 4.025 INCHES NOMINAL IN |
| First Slot Depth | 1.095 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN |
| Style Designator | RECTANGULAR, STEPPED |
| Material Document and Classification | L-P-377, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Second Hole Spacing | 0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN |
| Second Hole Diameter | 0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN |
| First Leg Width | 0.005 INCHES NOMINAL IN |
| First Hole Spacing | 0.207 INCHES NOMINAL IN |
| Material | PLASTIC POLYESTER OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 218-37115-1 | 5/9 Secondary reference U.S. Government activity |
| 218-37115 | 3/1 Design control — primary reference U.S. Government activity |
NSN 5970-00-445-8086 is a Insulator,plate, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
Key specifications for 5970-00-445-8086: Overall Height: 1.100 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN; First Slot Width: 0.550 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN; First Hole Diameter: 0.145 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN; Third Hole Spacing: 4.025 INCHES NOMINAL IN. 11 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.