The Insulator,plate, cataloged under National Stock Number 5970-00-238-5845, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is The Delbert Blinn Co Inc. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-00-238-5845 |
| Primary Part Number | SDM-306 |
| Item Name | Insulator,plate |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Manufacturer | The Delbert Blinn Co Inc |
| Status | ACTIVE |
| First End Radius | 0.217 INCHES NOMINAL IN |
| First Hole Diameter | 0.123 INCHES NOMINAL IN |
| Third Hole Spacing | 0.689 INCHES NOMINAL IN |
| Dielectric Material Voltage Rating Per Unit Thickness | 4000.0 VOLTS PER MIL /0.001 INCH/ IN |
| First Hole Spacing | 0.217 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| SDM-306 PRIMARY | The Delbert Blinn Co Inc (USA) |
| Reference | Meaning |
|---|---|
| 370221-1 | 7/2 Vendor item drawing reference Raytheon Company Dba Raytheon Co |
| 370221-1 | 5/9 Secondary reference Raytheon Company Div Corp |
NSN 5970-00-238-5845 is a Insulator,plate, manufactured by The Delbert Blinn Co Inc, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
NSN 5970-00-238-5845 has 1 manufacturer part number on file: SDM-306 (The Delbert Blinn Co Inc).
Key specifications for SDM-306: Overall Height: 0.002 INCHES NOMINAL IN; First End Radius: 0.217 INCHES NOMINAL IN; First Hole Diameter: 0.123 INCHES NOMINAL IN; Third Hole Spacing: 0.689 INCHES NOMINAL IN. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.