The Insulation Sleeving,electrical,s, cataloged under National Stock Number 5970-00-008-7472, is classified within Federal Supply Class 5970 (Electrical Insulators and Insulating Materials) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Te Connectivity Corporation Dba Raychem Product Division. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5970-00-008-7472 |
| Primary Part Number | 226A075-3 |
| Item Name | Insulation Sleeving,electrical,s |
| FSC / FSG | 5970 / 59 — Electrical Insulators and Insulating Materials |
| Manufacturer | Te Connectivity Corporation Dba Raychem Product Division |
| Status | ACTIVE |
| Main Body Small End Inside Diameter | 0.720 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Small End Inside Diameter | 2.500 INCHES MINIMUM AS SUPPLIED IN |
| Angle Between Large End and Small End Centerlines in Deg | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| Angle Between Large End and Small End Centerlines in Deg | 0.0 NOMINAL AS SUPPLIED |
| Temp Rating | -55.0 CELSIUS DEGC |
| Main Body Large End Inside Diameter | 1.060 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| Main Body Large End Inside Diameter | 2.500 INCHES MINIMUM AS SUPPLIED IN |
| Large End Wall Thickness of Main Body | 0.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Large End Wall Thickness of Main Body | 0.150 INCHES MAXIMUM AS SUPPLIED IN |
| Flexibility | SEMIRIGID |
| Material Document and Classification | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| Small End Wall Thickness of Main Body | 0.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Small End Wall Thickness of Main Body | 0.150 INCHES MAXIMUM AS SUPPLIED IN |
| Dielectric Material Voltage Rating Per Unit Thickness | 200.0 VOLTS PER MIL /0.001 INCH/ IN |
| Distance From Intersecting Centerlines to Edge of Small End | 4.000 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Reliability Indicator | NOT ESTABLISHED |
| Color | BLACK |
| Environmental Protection | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| Minimum Tensile Strength | 1500 POUNDS PER SQUARE INCH LBS |
| Material | PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| Distance From Centerline of Small End to Edge of Large End | 3.000 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 226A075-3 PRIMARY | Te Connectivity Corporation Dba Raychem Product Division (USA) |
| Reference | Meaning |
|---|---|
| 337H186-1 | 5/9 Secondary reference 3m Co Admininistrative Electronic & Communications |
| 11176323-2 | 7/9 Vendor item drawing reference Ballistic Missile Defense Systems Command |
| 11176323 | D/9 Drawing number reference only Ballistic Missile Defense Systems Command |
NSN 5970-00-008-7472 is a Insulation Sleeving,electrical,s, manufactured by Te Connectivity Corporation Dba Raychem Product Division, classified under FSC 5970, Electrical Insulators and Insulating Materials. Status: active.
NSN 5970-00-008-7472 has 1 manufacturer part number on file: 226A075-3 (Te Connectivity Corporation Dba Raychem Product Division).
1 possible match (shared part number, not a government interchangeability claim): 5970-00-161-7975. Verify interchangeability with system specifications before substitution.
Key specifications for 226A075-3: Main Body Small End Inside Diameter: 0.720 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN; Main Body Small End Inside Diameter: 2.500 INCHES MINIMUM AS SUPPLIED IN; Angle Between Large End and Small End Centerlines in Deg: 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY; Angle Between Large End and Small End Centerlines in Deg: 0.0 NOMINAL AS SUPPLIED. 21 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.