PartsTable
Technical Data Sheet
Download PDF

5968329-ITEM10 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5968329-ITEM10: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 6.490 INCHES NOMINAL IN, hole_diameter: 1.670 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN, overall_width: 8.000 INCHES NOMINAL IN, fork_span_width: 6.000 INCHES NOMINAL IN, surface_treatment: PAINT OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-313-4028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5968329-ITEM10
NSN: 5340-01-313-4028
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length6.490 INCHES NOMINAL IN
hole_diameter1.670 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
overall_width8.000 INCHES NOMINAL IN
fork_span_width6.000 INCHES NOMINAL IN
surface_treatmentPAINT OVERALL
fork_arm_thickness1.000 INCHES NOMINAL IN
rod_connection_bore_diameter2.620 INCHES MINIMUM AND 2.640 INCHES MAXIMUM IN
material_document_and_classificationASTM 131 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end19.400 INCHES NOMINAL IN
NSN5340-01-313-4028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5968329-ITEM10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 6.000 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 1.000 INCHES NOMINAL IN
•
SHANK LENGTH: 6.490 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM 131 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PAINT OVERALL
•
ROD CONNECTION BORE DIAMETER: 2.620 INCHES MINIMUM AND 2.640 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH6.000 INCHES NOMINAL IN
FORK ARM THICKNESS1.000 INCHES NOMINAL IN
SHANK LENGTH6.490 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM 131 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH8.000 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
ROD CONNECTION BORE DIAMETER2.620 INCHES MINIMUM AND 2.640 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER1.670 INCHES MINIMUM AND 1.690 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END19.400 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
LCPL36MK12-5968329-ITEM10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5968329-ITEM10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5968329-ITEM10?
5968329-ITEM10 is a CLEVIS,ROD END.
What parts can replace 5968329-ITEM10?
There is 1 known substitute for 5968329-ITEM10: LCPL36MK12-5968329-ITEM10. Substitute compatibility should be verified for your specific system.
What is the NSN for 5968329-ITEM10?
5968329-ITEM10 is cataloged in the U.S. Government catalog under NSN 5340-01-313-4028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5968329-ITEM10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.