PartsTable TECHNICAL DATA SHEET
NSN 5962-01-308-6358Government record, cited

Microcircuit, Memory5962-01-308-6358

NSN 5962-01-308-6358 · NIIN 013086358
FSC 5962 — Microcircuits, Electronic · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5962-01-308-6358 · 5962013086358 · NIIN 013086358 · 01-308-6358 · FSC 5962 Microcircuits, Electronic · 49051001-1 · N82S185N · ROM/PROM · 570088-1 · 49051001-2
Nearby stock numbers  ·
Features
  • Microcircuit,memory — FSC 5962
  • Input Circuit Pattern: 12 INPUT
  • Inclosure Material: PLASTIC
  • Terminal Surface Treatment: SOLDER
  • Body Width: 0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
  • Body Height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
  • Features Provided: 3-STATE OUTPUT AND BIPOLAR AND PROGRAMMABLE AND W/ENABLE
  • Inclosure Configuration: DUAL-IN-LINE
Identification
  • NSN: 5962-01-308-6358
  • NIIN: 013086358
  • FSC: 5962 — Microcircuits, Electronic
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Microcircuit,memory, cataloged under National Stock Number 5962-01-308-6358, is classified within Federal Supply Class 5962 (Microcircuits, Electronic) of the Electrical and Electronic Equipment Components group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5962-01-308-6358
Item NameMicrocircuit,memory
FSC / FSG5962 / 59 — Microcircuits, Electronic
StatusACTIVE
Input Circuit Pattern12 INPUT
Inclosure MaterialPLASTIC
Terminal Surface TreatmentSOLDER
Body Width0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
Body Height0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
Features Provided3-STATE OUTPUT AND BIPOLAR AND PROGRAMMABLE AND W/ENABLE
Inclosure ConfigurationDUAL-IN-LINE
Memory Device TypeROM
Body Length0.915 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
Storage Temp Range-65.0 TO 150.0 CELSIUS DEGC
Output Logic FormTRANSISTOR-TRANSISTOR LOGIC
Voltage Rating and Type Per Characteristic7.0 VOLTS MAXIMUM POWER SOURCE
Operating Temp Range+0.0 TO 75.0 CELSIUS DEGC
Terminal Type and Quantity22 PRINTED CIRCUIT
Maximum Power Dissipation Rating409.6 MILLIWATTS
Memory CapacityUNKNOWN
Time Rating Per Chacteristic100.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 100.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
49051001-1 3/9 Design control — primary reference
L3 Communications Telemetry-West Div Telemetry-West
N82S185N 5/9 Secondary reference
Philips Semiconductors Inc
ROM/PROM 5/1 Secondary reference
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
570088-1 5/1 Secondary reference
L3 Communications Telemetry-West Div Telemetry-West
49051001-2 5/1 Secondary reference
L3 Communications Telemetry-West Div Telemetry-West

Frequently Asked Questions

What is NSN 5962-01-308-6358?

NSN 5962-01-308-6358 is a Microcircuit,memory, classified under FSC 5962, Microcircuits, Electronic. Status: active.

What are the specifications of 5962-01-308-6358?

Key specifications for 5962-01-308-6358: Input Circuit Pattern: 12 INPUT; Inclosure Material: PLASTIC; Terminal Surface Treatment: SOLDER; Body Width: 0.245 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5962-01-308-6358 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5962-01-308-6358?

NSN 5962-01-308-6358 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com