PartsTable TECHNICAL DATA SHEET
NSN 5962-01-298-0271Government record, cited

Microcircuit, Memory5962-01-298-0271

NSN 5962-01-298-0271 · NIIN 012980271
FSC 5962 — Microcircuits, Electronic · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5962-01-298-0271 · 5962012980271 · NIIN 012980271 · 01-298-0271 · FSC 5962 Microcircuits, Electronic · 08662-80046 · 1816-1692 · 1816-1692 · ROM/PROM FAMILY 029 · N82S191F
Nearby stock numbers  ·
Features
  • Microcircuit,memory — FSC 5962
  • Input Circuit Pattern: 14 INPUT
  • Inclosure Material: CERAMIC
  • Terminal Surface Treatment: SOLDER
  • Body Width: 0.560 INCHES MAXIMUM IN
  • Body Height: 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
  • Features Provided: HERMETICALLY SEALED AND PROGRAMMED AND 3-STATE OUTPUT AND BIPOLAR AND W/ENABLE
  • Inclosure Configuration: DUAL-IN-LINE
Identification
  • NSN: 5962-01-298-0271
  • NIIN: 012980271
  • FSC: 5962 — Microcircuits, Electronic
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Microcircuit,memory, cataloged under National Stock Number 5962-01-298-0271, is classified within Federal Supply Class 5962 (Microcircuits, Electronic) of the Electrical and Electronic Equipment Components group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5962-01-298-0271
Item NameMicrocircuit,memory
FSC / FSG5962 / 59 — Microcircuits, Electronic
StatusACTIVE
Input Circuit Pattern14 INPUT
Inclosure MaterialCERAMIC
Terminal Surface TreatmentSOLDER
Body Width0.560 INCHES MAXIMUM IN
Body Height0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
Features ProvidedHERMETICALLY SEALED AND PROGRAMMED AND 3-STATE OUTPUT AND BIPOLAR AND W/ENABLE
Inclosure ConfigurationDUAL-IN-LINE
Memory Device TypeROM
Body Length1.235 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
Storage Temp Range-65.0 TO 150.0 CELSIUS DEGC
Output Logic FormTRANSISTOR-TRANSISTOR LOGIC
Voltage Rating and Type Per Characteristic7.0 VOLTS MAXIMUM POWER SOURCE
Operating Temp Range+0.0 TO 75.0 CELSIUS DEGC
Terminal Type and Quantity24 PRINTED CIRCUIT
Maximum Power Dissipation Rating655.0 MILLIWATTS
Memory CapacityUNKNOWN
Time Rating Per Chacteristic80.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 80.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
08662-80046 5/9 Secondary reference
Hewlett-Packard Company Dba HP
1816-1692 C/1 Advisory reference — outside the item-of-supply concept
Hewlett-Packard Company Dba HP
1816-1692 3/9 Design control — primary reference
Agilent Technologies Inc. Div Agilent Solution Support
ROM/PROM FAMILY 029 5/1 Secondary reference
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
N82S191F 5/9 Secondary reference
Philips Semiconductors Inc

Frequently Asked Questions

What is NSN 5962-01-298-0271?

NSN 5962-01-298-0271 is a Microcircuit,memory, classified under FSC 5962, Microcircuits, Electronic. Status: active.

What are the specifications of 5962-01-298-0271?

Key specifications for 5962-01-298-0271: Input Circuit Pattern: 14 INPUT; Inclosure Material: CERAMIC; Terminal Surface Treatment: SOLDER; Body Width: 0.560 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5962-01-298-0271 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5962-01-298-0271?

NSN 5962-01-298-0271 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com