The Semiconductor Device,diode, cataloged under National Stock Number 5961-01-023-3443, is classified within Federal Supply Class 5961 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 12 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5961-01-023-3443 |
| Primary Part Number | MILS19500-286 |
| Item Name | Semiconductor Device,diode |
| FSC / FSG | 5961 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Mounting Method | TERMINAL |
| Overall Diameter | 0.080 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specification/standard Data | 81349-MIL-S-19500/286 GOVERNMENT SPECIFICATION |
| Material | GLASS ENCLOSURE |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Voltage Rating in Volts Per Characteristic | 400.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE AND 400.0 MAXIMUM REVERSE VOLTAGE, INSTANTANEOUS |
| Features Provided | HERMETICALLY SEALED CASE |
| Terminal Length | 1.000 INCHES MINIMUM IN |
| Maximum Operating Temp Per Measurement Point | 150.0 CELSIUS AMBIENT AIR DEGC |
| Current Rating Per Characteristic | 333.00 MILLIAMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| Material | SILICON SEMICONDUCTOR |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILS19500-286 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| JANTXV1N4246 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-19500/286 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5961-01-023-3443 is a Semiconductor Device,diode, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5961 (No Item Name Available). Status: active.
NSN 5961-01-023-3443 has 3 cross-referenced part numbers: MILS19500-286 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), JANTXV1N4246 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-19500/286 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5961-01-023-3443: 5961-00-068-6466, 5961-00-079-5435, 5961-00-082-4073 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MILS19500-286: Mounting Method: TERMINAL; Overall Diameter: 0.080 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Specification/standard Data: 81349-MIL-S-19500/286 GOVERNMENT SPECIFICATION. 13 total characteristics are documented in the Federal Logistics Information System.