PartsTable
Technical Data Sheet
Download PDF

596-7410523-35 — RUNNER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

596-7410523-35: RUNNER.

The RUNNER is a the manufacturer industrial component. Key specifications include material: PLASTIC, overall_width: 3.500 INCHES NOMINAL IN, overall_height: 1.620 INCHES NOMINAL IN, overall_length: 8.867 INCHES MINIMUM AND 8.870 INCHES MAXIMUM IN, end_item_identification: W/S: SEAWOLF CLASS SSN, part_name_assigned_by_controlling_agency: SKID. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-0883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
596-7410523-35
NSN: 5340-01-516-0883
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC
overall_width3.500 INCHES NOMINAL IN
overall_height1.620 INCHES NOMINAL IN
overall_length8.867 INCHES MINIMUM AND 8.870 INCHES MAXIMUM IN
special_featuresMATERIAL IS "DELRIN"; HAS 4 COUNTERBORED MOUNTING HOLES WITH OUTSIDE DIAMETER OF 1.190 INCHES AND INSIDE DIAMETER OF 0.656 INCHES; 2.690 INCHES OF LENGTH ARE TAPERED AT 15 DEGREES IN
end_item_identificationW/S: SEAWOLF CLASS SSN
part_name_assigned_by_controlling_agencySKID
NSN5340-01-516-0883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 596-7410523-35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.620 INCHES NOMINAL IN
OVERALL LENGTH8.867 INCHES MINIMUM AND 8.870 INCHES MAXIMUM IN
OVERALL WIDTH3.500 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IS "DELRIN"; HAS 4 COUNTERBORED MOUNTING HOLES WITH OUTSIDE DIAMETER OF 1.190 INCHES AND INSIDE DIAMETER OF 0.656 INCHES; 2.690 INCHES OF LENGTH ARE TAPERED AT 15 DEGREES IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSKID
END ITEM IDENTIFICATIONW/S: SEAWOLF CLASS SSN
MATERIALPLASTIC
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
B434-1000-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B434-2130-35Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
596-7409207-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 596-7410523-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 596-7410523-35?
596-7410523-35 is a RUNNER.
What parts can replace 596-7410523-35?
There are 3 known substitutes for 596-7410523-35: B434-1000-30, B434-2130-35, 596-7409207-30. Substitute compatibility should be verified for your specific system.
What is the NSN for 596-7410523-35?
596-7410523-35 is cataloged in the U.S. Government catalog under NSN 5340-01-516-0883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 596-7410523-35