PartsTable
Technical Data Sheet
Download PDF

596-7410331-7 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

596-7410331-7: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400, overall_width: 0.125 INCHES NOMINAL IN, overall_height: 1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN, overall_length: 6.920 INCHES MINIMUM AND 6.960 INCHES MAXIMUM IN, special_features: BRACKET MOUNTING HOLES ARE 5.5" SPACED APART AND WITH CHAMFERED CONERS OF 45 DEGREES, mounting_hole_type: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-512-6044, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
596-7410331-7
NSN: 5340-01-512-6044
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400
overall_width0.125 INCHES NOMINAL IN
overall_height1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN
overall_length6.920 INCHES MINIMUM AND 6.960 INCHES MAXIMUM IN
special_featuresBRACKET MOUNTING HOLES ARE 5.5" SPACED APART AND WITH CHAMFERED CONERS OF 45 DEGREES
mounting_hole_typePLAIN
mounting_hole_diameter0.281 INCHES NOMINAL IN
mounting_hole_quantity2
end_item_identificationHUB AY NETWORK; W/S: VIRGINIA CLASS SUBMARINE SSN-774
material_document_and_classificationQQ-N-281, CL-A, COND-CR (ANL), FORM 4 FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyRETAINER
NSN5340-01-512-6044
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 596-7410331-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281, CL-A, COND-CR (ANL), FORM 4 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281, CL-A, COND-CR (ANL), FORM 4 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.281 INCHES NOMINAL IN
OVERALL LENGTH6.920 INCHES MINIMUM AND 6.960 INCHES MAXIMUM IN
OVERALL WIDTH0.125 INCHES NOMINAL IN
SPECIAL FEATURESBRACKET MOUNTING HOLES ARE 5.5" SPACED APART AND WITH CHAMFERED CONERS OF 45 DEGREES
PART NAME ASSIGNED BY CONTROLLING AGENCYRETAINER
END ITEM IDENTIFICATIONHUB AY NETWORK; W/S: VIRGINIA CLASS SUBMARINE SSN-774
MATERIALNICKEL ALLOY 400
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
B434-5130-52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
596-7410501-52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 596-7410331-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 596-7410331-7?
596-7410331-7 is a BRACKET,MOUNTING.
What parts can replace 596-7410331-7?
There are 2 known substitutes for 596-7410331-7: B434-5130-52, 596-7410501-52. Substitute compatibility should be verified for your specific system.
What is the NSN for 596-7410331-7?
596-7410331-7 is cataloged in the U.S. Government catalog under NSN 5340-01-512-6044. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 596-7410331-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.