PartsTable
Technical Data Sheet
Download PDF

596-7410286-30 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

596-7410286-30: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_height: 0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), locking_feature: PREVAILING TORQUE WITH NONMETALLIC INSERT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-518-0470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
596-7410286-30
NSN: 5310-01-518-0470
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL NUT
nut_height0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
width_across_flats0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch13
NSN5310-01-518-0470
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 596-7410286-30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.575 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
THREAD CLASS3B
THREAD QUANTITY PER INCH13
MATERIALSTEEL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
B434-2450-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 596-7410286-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 596-7410286-30?
596-7410286-30 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 596-7410286-30?
There is 1 known substitute for 596-7410286-30: B434-2450-30. Substitute compatibility should be verified for your specific system.
What is the NSN for 596-7410286-30?
596-7410286-30 is cataloged in the U.S. Government catalog under NSN 5310-01-518-0470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 596-7410286-30