PartsTable
Technical Data Sheet
Download PDF

5967-41-024-9132 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5967-41-024-9132: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 0.690 INCHES NOMINAL IN, length: 8.000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 0.250 INCHES NOMINAL IN, special_features: E MOUNTING HOLES WITH 0.218 IN DIA THRU, AND HOLES ARE COUNTERSUNK IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-511-7537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5967-41-024-9132
NSN: 5340-01-511-7537
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width0.690 INCHES NOMINAL IN
length8.000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness0.250 INCHES NOMINAL IN
special_featuresE MOUNTING HOLES WITH 0.218 IN DIA THRU, AND HOLES ARE COUNTERSUNK IN
NSN5340-01-511-7537
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5967-41-024-9132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 8.000 INCHES NOMINAL IN
•
WIDTH: 0.690 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH8.000 INCHES NOMINAL IN
SPECIAL FEATURESE MOUNTING HOLES WITH 0.218 IN DIA THRU, AND HOLES ARE COUNTERSUNK IN
WIDTH0.690 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
7410249Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5967-41-024-9132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5967-41-024-9132?
5967-41-024-9132 is a PAD,CUSHIONING.
What parts can replace 5967-41-024-9132?
There is 1 known substitute for 5967-41-024-9132: 7410249. Substitute compatibility should be verified for your specific system.
What is the NSN for 5967-41-024-9132?
5967-41-024-9132 is cataloged in the U.S. Government catalog under NSN 5340-01-511-7537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5967-41-024-9132