The Crystal Unit,quartz, cataloged under National Stock Number 5955-01-247-9449, is classified within Federal Supply Class 5955 (Oscillators and Piezoelectric Crystals) of the Electrical and Electronic Equipment Components group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5955-01-247-9449 |
| Item Name | Crystal Unit,quartz |
| FSC / FSG | 5955 / 59 — Oscillators and Piezoelectric Crystals |
| Status | ACTIVE |
| Controlled Reference Temp | 85.0 CELSIUS DEGC |
| Operable Temp Range | -55.0 TO 80.0 CELSIUS DEGC |
| Frequency Tolerance for Operating Temp in Percent | -0.002 TO 0.002 |
| Terminal Diameter | 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Frequency Tolerance at Reference Temp in Percent | -0.002 TO 0.002 |
| Terminal Length | 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN |
| Mode of Oscillation | FUNDAMENTAL |
| Body Width | 0.402 INCHES MAXIMUM IN |
| Equivalent Resistance Value in Ohms | 22.0 MAXIMUM |
| Frequency Stability in Percent | -0.0001 TO 0.0001 |
| Overall Thickness | 0.183 INCHES MAXIMUM IN |
| Style Designator | OVAL BODY, PIN TERMINALS |
| Drive Level Rating | 2.0 MILLIWATTS MINIMUM AND 3.0 MILLIWATTS MAXIMUM |
| Specification/standard Data | 81349-MIL-C-3098/114 GOVERNMENT SPECIFICATION |
| Body Length | 0.530 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Load Capacitance in Picofarads | 31.5 MINIMUM AND 32.5 MAXIMUM |
| Circuit Resonance | ANTIRESONANCE |
| Shunt Capacitance in Picofarads | 7.0 MAXIMUM |
| Operating Temp Range | +80.0 TO 90.0 CELSIUS DEGC |
| Test Data Document | 81349-MIL-C-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specified Frequency | 11.500 MEGAHERTZ |
| Body Thickness | 0.150 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| CR135/U11M50000 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-3098/114 | 4/1 Identification reference U.S. Government activity |
| MIL-C-3098/114 | 5/9 Secondary reference U.S. Government activity |
NSN 5955-01-247-9449 is a Crystal Unit,quartz, classified under FSC 5955, Oscillators and Piezoelectric Crystals. Status: active.
Key specifications for 5955-01-247-9449: Controlled Reference Temp: 85.0 CELSIUS DEGC; Operable Temp Range: -55.0 TO 80.0 CELSIUS DEGC; Frequency Tolerance for Operating Temp in Percent: -0.002 TO 0.002; Terminal Diameter: 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5955-01-247-9449 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.