PartsTable TECHNICAL DATA SHEET
NSN 5955-01-040-6330Government record, cited

Crystal Unit, Quartz5955-01-040-6330

NSN 5955-01-040-6330 · NIIN 010406330
FSC 5955 — Oscillators and Piezoelectric Crystals · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5955-01-040-6330 · 5955010406330 · NIIN 010406330 · 01-040-6330 · FSC 5955 Oscillators and Piezoelectric Crystals · CR-25B/U270.800KHZ · CR25/U270K8000 · MIL-PRF-3098/7 · MILC3098-7 · CR25BU
Nearby stock numbers  ·
Features
  • Crystal Unit,quartz — FSC 5955
  • Frequency Tolerance for Operating Temp in Percent: -0.010 TO 0.010
  • Terminal Diameter: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
  • Terminal Length: 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
  • Mode of Oscillation: FUNDAMENTAL
  • Body Width: 0.725 INCHES MAXIMUM IN
  • Equivalent Resistance Value in Ohms: 3500.0 MAXIMUM
  • Overall Thickness: 0.352 INCHES MAXIMUM IN
Identification
  • NSN: 5955-01-040-6330
  • NIIN: 010406330
  • FSC: 5955 — Oscillators and Piezoelectric Crystals
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Crystal Unit,quartz, cataloged under National Stock Number 5955-01-040-6330, is classified within Federal Supply Class 5955 (Oscillators and Piezoelectric Crystals) of the Electrical and Electronic Equipment Components group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5955-01-040-6330
Item NameCrystal Unit,quartz
FSC / FSG5955 / 59 — Oscillators and Piezoelectric Crystals
StatusACTIVE
Frequency Tolerance for Operating Temp in Percent-0.010 TO 0.010
Terminal Diameter0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
Terminal Length0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
Mode of OscillationFUNDAMENTAL
Body Width0.725 INCHES MAXIMUM IN
Equivalent Resistance Value in Ohms3500.0 MAXIMUM
Overall Thickness0.352 INCHES MAXIMUM IN
Style DesignatorOVAL BODY, PIN TERMINALS
Drive Level Rating1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM
Specification/standard Data81349-MILC3098/7 GOVERNMENT SPECIFICATION
Body Length0.775 INCHES MAXIMUM IN
Center to Center Distance Between Terminals0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
Circuit ResonanceSERIES RESONANCE
Operating Temp Range-40.0 TO 85.0 CELSIUS DEGC
Test Data Document81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Specified Frequency270.800 KILOHERTZ
Body Thickness0.317 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
CR-25B/U270.800KHZ 5/9 Secondary reference
U.S. Government activity
CR25/U270K8000 2/2 Government specification standardization
U.S. Government activity
MIL-PRF-3098/7 4/1 Identification reference
U.S. Government activity
MILC3098-7 5/9 Secondary reference
U.S. Government activity
CR25BU 5/9 Secondary reference
Electronic Research Company
339101 C/1 Advisory reference — outside the item-of-supply concept
Lockheed Martin Corporation Div Rms - Mitchel Field

Frequently Asked Questions

What is NSN 5955-01-040-6330?

NSN 5955-01-040-6330 is a Crystal Unit,quartz, classified under FSC 5955, Oscillators and Piezoelectric Crystals. Status: active.

What are the specifications of 5955-01-040-6330?

Key specifications for 5955-01-040-6330: Frequency Tolerance for Operating Temp in Percent: -0.010 TO 0.010; Terminal Diameter: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN; Terminal Length: 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN; Mode of Oscillation: FUNDAMENTAL. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5955-01-040-6330 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com