The Crystal Unit,quartz, cataloged under National Stock Number 5955-00-339-7615, is classified within Federal Supply Class 5955 (Oscillators and Piezoelectric Crystals) of the Electrical and Electronic Equipment Components group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 5 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5955-00-339-7615 |
| Item Name | Crystal Unit,quartz |
| FSC / FSG | 5955 / 59 — Oscillators and Piezoelectric Crystals |
| Status | ACTIVE |
| Frequency Tolerance for Operating Temp in Percent | -0.005 TO 0.005 AND -0.0010 TO 0.0010 |
| Terminal Diameter | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN |
| Terminal Length | 0.5003 INCHES MINIMUM IN |
| Mode of Oscillation | FUNDAMENTAL |
| Body Width | 0.402 INCHES MAXIMUM IN |
| Equivalent Resistance Value in Ohms | 75.0 MAXIMUM |
| Overall Thickness | 0.183 INCHES MAXIMUM IN |
| Style Designator | OVAL BODY, PIN TERMINALS |
| Drive Level Rating | 4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM |
| Specification/standard Data | 81349-MIL-C-3098/42 GOVERNMENT SPECIFICATION |
| Center to Center Distance Between Terminals | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Load Capacitance in Picofarads | 29.5 MINIMUM AND 30.5 MAXIMUM |
| Circuit Resonance | ANTIRESONANCE |
| Shunt Capacitance in Picofarads | 7.0 MAXIMUM |
| Operating Temp Range | -55.0 TO 105.0 CELSIUS AND -55.0 TO 125.0 CELSIUS DEGC |
| Test Data Document | 81349-MIL-C-3098G SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). G |
| Material | GLASS COVER HOLDER |
| Specified Frequency | 6.000 MEGAHERTZ AND 9.000 MEGAHERTZ |
| Body Thickness | 0.150 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-C-3098/42 | 5/9 Secondary reference U.S. Government activity |
| 238-990122-045 | C/1 Advisory reference — outside the item-of-supply concept Cmc Electronics Inc |
| CR64/U6M000000 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-3098/42 | 4/1 Identification reference U.S. Government activity |
| CR64U6-000000MHZ | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 10132989 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| CR64/U | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 289-7082-110 | 5/1 Secondary reference Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems |
NSN 5955-00-339-7615 is a Crystal Unit,quartz, classified under FSC 5955, Oscillators and Piezoelectric Crystals. Status: active.
5 possible matches (shared part number, not a government interchangeability claim): 5955-00-824-0047, 5955-01-015-3883, 5955-01-023-3104. Verify interchangeability with system specifications before substitution.
Key specifications for 5955-00-339-7615: Frequency Tolerance for Operating Temp in Percent: -0.005 TO 0.005 AND -0.0010 TO 0.0010; Terminal Diameter: 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN; Terminal Length: 0.5003 INCHES MINIMUM IN; Mode of Oscillation: FUNDAMENTAL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 5955-00-339-7615 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.