The Transformer,current, cataloged under National Stock Number 5950-01-324-4291, is classified within Federal Supply Class 5950 (Coils and Transformers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Magnetika Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5950-01-324-4291 |
| Primary Part Number | 1135688G1 |
| Item Name | Transformer,current |
| FSC / FSG | 5950 / 59 — Coils and Transformers |
| Manufacturer | Magnetika Inc |
| Status | ACTIVE |
| Mounting Facility Quantity | 4 SINGLE GROUP |
| Inclosure Type | FULLY INCLOSED |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 2.625 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |
| Input-Output Phase Relationship | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| Mounting Method | SLOT SINGLE GROUP |
| Body Width | 2.500 INCHES MAXIMUM IN |
| Winding Function and Quantity | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| Winding Shielding Method | CORE GROUNDED SINGLE COMPONENT |
| Maximum Operating Temp | 105.0 CELSIUS DEGC |
| Winding Operating Current | 100.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| Winding Operating Current | 50.0 AMPERES AC NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| Reliability Indicator | NOT ESTABLISHED |
| Frequency Rating | 47.5 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |
| Test Data Document | 28528-1135688 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Winding Operating Voltage | 200.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| Terminal Type and Quantity | 2 TAB, SOLDER LUG AND 2 WIRE LEAD W/LUG |
| Hazardous Locations/environmental Protection | VIBRATION RESISTANT |
| Mounting Slot Width | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM SINGLE GROUP IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1135688G1 | Magnetika Inc (USA) |
| 1135688G1 | Electronic Transformer Corp Div Electronic Transformer Corporation (USA) |
| 1135688G1 | L3harris Technologies, Inc. Dba Harris Corporation (USA) |
| 1135688G1 | Vishay Dale Electronics, Inc. (USA) |
| Reference | Meaning |
|---|---|
| 1135688G1 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 1135688G1 | 3/9 Design control — primary reference Itt Industries Inc Itt Aerospace Communications Div East |
| 1135688G1 | 5/9 Secondary reference Ptc Transformers |
| 1135688G1 | 5/9 Secondary reference U.S. Government activity |
| 1135688G1 | 5/2 Secondary reference U.S. Government activity |
| 1135688G1 | 5/9 Secondary reference Technitrol, Inc. Dba Pulse Div Military/aerospace |
NSN 5950-01-324-4291 is a Transformer,current, manufactured by Magnetika Inc, classified under FSC 5950, Coils and Transformers. Status: active.
NSN 5950-01-324-4291 has 4 manufacturer part numbers on file: 1135688G1 (Magnetika Inc), 1135688G1 (Electronic Transformer Corp Div Electronic Transformer Corporation), 1135688G1 (L3harris Technologies, Inc. Dba Harris Corporation), 1135688G1 (Vishay Dale Electronics, Inc.).
Key specifications for 1135688G1: Overall Height: 3.250 INCHES MAXIMUM IN; Mounting Facility Quantity: 4 SINGLE GROUP; Inclosure Type: FULLY INCLOSED; Center to Center Distance Between Mounting Facilities Parallel to Length: 2.625 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN. 19 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.