PartsTable TECHNICAL DATA SHEET
NSN 5950-01-256-1565Government record, cited

Reactor5950-01-256-1565

NSN 5950-01-256-1565 · NIIN 012561565
FSC 5950 — Coils and Transformers · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5950-01-256-1565 · 5950012561565 · NIIN 012561565 · 01-256-1565 · FSC 5950 Coils and Transformers · MIL-PRF-27/287 · M27/287-03 · MIL-T-27/287
Nearby stock numbers  ·
Features
  • Reactor — FSC 5950
  • Mounting Facility Quantity: 1 SINGLE GROUP
  • Inclosure Type: FULLY INCLOSED
  • Overall Diameter: 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
  • Mounting Method: UNTHREADED HOLE(S) SINGLE GROUP
  • Inductance Rating: 500.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
  • Mounting Hole Diameter: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM SINGLE GROUP IN
  • Specification/standard Data: 81349-MIL-T-27/287 GOVERNMENT SPECIFICATION
Identification
  • NSN: 5950-01-256-1565
  • NIIN: 012561565
  • FSC: 5950 — Coils and Transformers
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Reactor, cataloged under National Stock Number 5950-01-256-1565, is classified within Federal Supply Class 5950 (Coils and Transformers) of the Electrical and Electronic Equipment Components group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5950-01-256-1565
Item NameReactor
FSC / FSG5950 / 59 — Coils and Transformers
StatusACTIVE
Mounting Facility Quantity1 SINGLE GROUP
Inclosure TypeFULLY INCLOSED
Overall Diameter0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
Mounting MethodUNTHREADED HOLE(S) SINGLE GROUP
Inductance Rating500.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
Mounting Hole Diameter0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM SINGLE GROUP IN
Specification/standard Data81349-MIL-T-27/287 GOVERNMENT SPECIFICATION
Maximum Operating Temp130.0 CELSIUS DEGC
Winding Operating Current1.8 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
Rating MethodELECTRICAL SINGLE COMPONENT SINGLE WINDING
DC Resistance Rating in Ohms0.300 SINGLE COMPONENT SINGLE WINDING
Reliability IndicatorNOT ESTABLISHED
Winding Quantity1 SINGLE COMPONENT
Frequency Rating10.0 KILOHERTZ NOMINAL SINGLE COMPONENT
Test Data Document81349-MIL-T-27 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Terminal Type and Quantity2 PIN
Inductance TypeFIXED
Hazardous Locations/environmental ProtectionVIBRATION RESISTANT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-PRF-27/287 4/1 Identification reference
U.S. Government activity
M27/287-03 2/2 Government specification standardization
U.S. Government activity
MIL-T-27/287 5/9 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5950-01-256-1565?

NSN 5950-01-256-1565 is a Reactor, classified under FSC 5950, Coils and Transformers. Status: active.

What are the specifications of 5950-01-256-1565?

Key specifications for 5950-01-256-1565: Mounting Facility Quantity: 1 SINGLE GROUP; Inclosure Type: FULLY INCLOSED; Overall Diameter: 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN; Mounting Method: UNTHREADED HOLE(S) SINGLE GROUP. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5950-01-256-1565 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 5950-01-256-1565?

NSN 5950-01-256-1565 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com