The Transformer,current, cataloged under National Stock Number 5950-00-187-4361, is classified within Federal Supply Class 5950 (Coils and Transformers) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5950-00-187-4361 |
| Primary Part Number | 563-6507-933891PC11 |
| Item Name | Transformer,current |
| FSC / FSG | 5950 / 59 — Coils and Transformers |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Mounting Facility Quantity | 4 SINGLE GROUP |
| Inclosure Type | OPEN |
| Center to Center Distance Between Mounting Facilities Parallel to Length | 3.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |
| Input-Output Phase Relationship | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| Mounting Method | FLANGE AND UNTHREADED HOLE(S) SINGLE GROUP |
| Mounting Hole Diameter | 0.562 INCHES NOMINAL SINGLE GROUP IN |
| Winding Function and Quantity | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| Installation for Which Designed | INDOOR NONPORTABLE |
| Nondefinitive Spec/std Data | 3 CLASS AND NSS GRADE |
| Winding Operating Current | 5.0 AMPERES AC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY |
| Winding Operating Current | 75.0 AMPERES AC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| Reliability Indicator | NOT ESTABLISHED |
| Frequency Rating | 54.0 HERTZ MINIMUM AND 66.0 HERTZ MAXIMUM SINGLE COMPONENT |
| Center to Center Distance Between Mounting Facilities Parallel to Width | 3.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN |
| Test Data Document | 81349-MIL-I-1361 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Winding Operating Voltage | 500.00 AC VOLTS MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| Terminal Type and Quantity | 2 BUS (BAR) CONDUCTOR AND 2 SLOTTED LUG |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 563-6507-933891PC11 | Naval Inventory Control Point Mechanicsburg (USA) |
| SS523S6201-1225802PC4 | Naval Inventory Control Point Mechanicsburg (USA) |
| 214-6507-798527PC8 | Naval Inventory Control Point Mechanicsburg (USA) |
| 566-6507-1439817PC11 | Naval Inventory Control Point Mechanicsburg (USA) |
| 752X41G8 | General Electric Company Dba Ge Structured Services Div General Electric Structured Services, Lp (USA) |
| Reference | Meaning |
|---|---|
| G17T6722-10 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5950-00-187-4361 is a Transformer,current, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5950, Coils and Transformers. Status: active.
NSN 5950-00-187-4361 has 5 manufacturer part numbers on file: 563-6507-933891PC11 (Naval Inventory Control Point Mechanicsburg), SS523S6201-1225802PC4 (Naval Inventory Control Point Mechanicsburg), 214-6507-798527PC8 (Naval Inventory Control Point Mechanicsburg), 566-6507-1439817PC11 (Naval Inventory Control Point Mechanicsburg), 752X41G8 (General Electric Company Dba Ge Structured Services Div General Electric Structured Services, Lp).
Key specifications for 563-6507-933891PC11: Mounting Facility Quantity: 4 SINGLE GROUP; Inclosure Type: OPEN; Center to Center Distance Between Mounting Facilities Parallel to Length: 3.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP IN; Input-Output Phase Relationship: SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT. 17 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.