PartsTable
Technical Data Sheet
Download PDF

595-7067876-65 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

595-7067876-65: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include radius: 0.812 INCHES NOMINAL IN, material: STEEL COMP 4140 OR STEEL COMP 4142 OVERALL, hole_shape: SLOTTED, slot_width: 0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN, slot_length: 1.620 INCHES NOMINAL IN, tongue_width: 1.621 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-497-5794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
595-7067876-65
NSN: 5340-01-497-5794
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
radius0.812 INCHES NOMINAL IN
materialSTEEL COMP 4140 OR STEEL COMP 4142 OVERALL
hole_shapeSLOTTED
slot_width0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
slot_length1.620 INCHES NOMINAL IN
tongue_width1.621 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
special_featuresHAS 0.062 INCH CHAMFER OF 45 DEGREES ON SLOTTED END; SLOT HAS 0.031 INCH CHAMFER OF 45 DEGREES ON BOTH SIDES IN
style_designatorCONNECTOR
tongue_thickness0.750 INCHES NOMINAL IN
body_overall_diameter1.621 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
end_item_identificationW/S:LOS ANGELES CLASS SSN (688)
rod_connection_bore_depth1.880 INCHES NOMINAL IN
NSN5340-01-497-5794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 595-7067876-65 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE THICKNESS: 0.750 INCHES NOMINAL IN
•
TONGUE WIDTH: 1.621 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
•
RADIUS: 0.812 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A193,GR B7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE SHAPE: SLOTTED
TECHNICAL CHARACTERISTICS
TONGUE THICKNESS0.750 INCHES NOMINAL IN
TONGUE WIDTH1.621 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.750 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
RADIUS0.812 INCHES NOMINAL IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A193,GR B7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE SHAPESLOTTED
SPECIAL FEATURESHAS 0.062 INCH CHAMFER OF 45 DEGREES ON SLOTTED END; SLOT HAS 0.031 INCH CHAMFER OF 45 DEGREES ON BOTH SIDES IN
ROD CONNECTION END LENGTH5.500 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER6.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
H692-1802-65Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 595-7067876-65?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 595-7067876-65?
595-7067876-65 is a CONNECTOR,ROD END.
What parts can replace 595-7067876-65?
There is 1 known substitute for 595-7067876-65: H692-1802-65. Substitute compatibility should be verified for your specific system.
What is the NSN for 595-7067876-65?
595-7067876-65 is cataloged in the U.S. Government catalog under NSN 5340-01-497-5794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 595-7067876-65

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.