PartsTable
Technical Data Sheet
Download PDF

595-7067876-62 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

595-7067876-62: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include radius: 0.625 INCHES NOMINAL IN, material: STEEL COMP 4140 OR STEEL COMP 4142 OVERALL, hole_shape: SLOTTED, slot_width: 0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN, slot_length: 0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN, overall_width: 0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-497-5816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
595-7067876-62
NSN: 5340-01-497-5816
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
radius0.625 INCHES NOMINAL IN
materialSTEEL COMP 4140 OR STEEL COMP 4142 OVERALL
hole_shapeSLOTTED
slot_width0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN
slot_length0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
overall_width0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
overall_height1.125 INCHES NOMINAL IN
special_featuresHAS 0.062 INCH CHAMFER OF 45 DEGREES ON INSERTED END; HAS 0.031 INCH CHAMFER OF 45 DEGREES ON BOTH SIDES OF OTHER END IN
style_designatorCONNECTOR
shank_overall_length1.625 INCHES NOMINAL IN
shank_outside_diameter1.000 INCHES NOMINAL IN
end_item_identificationW/S:LOS ANGELES CLASS SSN (688)
NSN5340-01-497-5816
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 595-7067876-62 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECURING PIN HOLE DIAMETER: 1.625 INCHES MINIMUM AND 1.626 INCHES MAXIMUM IN
•
RADIUS: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A193,GR B7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE SHAPE: SLOTTED
•
SHANK OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.125 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER1.625 INCHES MINIMUM AND 1.626 INCHES MAXIMUM IN
RADIUS0.625 INCHES NOMINAL IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A193,GR B7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
HOLE SHAPESLOTTED
SHANK OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
SPECIAL FEATURESHAS 0.062 INCH CHAMFER OF 45 DEGREES ON INSERTED END; HAS 0.031 INCH CHAMFER OF 45 DEGREES ON BOTH SIDES OF OTHER END IN
DISTANCE FROM END TO HOLE CENTER2.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
H692-1802-62Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 595-7067876-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 595-7067876-62?
595-7067876-62 is a CONNECTOR,ROD END.
What parts can replace 595-7067876-62?
There is 1 known substitute for 595-7067876-62: H692-1802-62. Substitute compatibility should be verified for your specific system.
What is the NSN for 595-7067876-62?
595-7067876-62 is cataloged in the U.S. Government catalog under NSN 5340-01-497-5816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 595-7067876-62

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.